Stuart Turner Shower Pumps

Look at the bar ratings on the pumps, this range runs from about 1.5 up to 4.5 bar in our range, and match it to the kind of shower you want. If you want a modest, economical flow for a mixer or electric shower, 1.5-2.0 bar is common; 2.6-3.0 bar gives a noticeably stronger, more invigorating spray for a standard handset or rail shower; and 4.0-4.5 bar suits large rain heads or multiple outlets. a Monsoon 3.0 bar pump will give a much fuller rain-head experience than a Showermate 1.5 bar unit.

Single-feed pumps boost either hot or cold only and are included in our range here as "Single - Hot OR Cold," while twin-feed pumps boost both hot and cold supplies and are shown as "Twin - Hot AND Cold." If you only need to support one pipe (where the other supply is already pressurised), a single-feed pump is enough; for a conventional gravity-fed system with separate hot and cold supplies to the shower, a twin-feed is the correct, safer option. Most household shower upgrades use a twin-feed pump to ensure balanced performance at the mixer.

Regenerative pumps are designed to generate higher pressure at moderate flow, ideal for a powerful single shower; centrifugal pumps generally deliver higher flow for multiple outlets or baths; peripheral pumps are compact and often quieter for moderate pressure needs. On this page you'll find 8 regenerative, 3 centrifugal and 16 peripheral options, so you can balance noise, pressure and flow depending on whether you run one shower or several outlets. If quiet, steady pressure for a single handset is your priority, a regenerative or peripheral model is often the best fit.

Brass construction is more durable and resistant to wear and corrosion, which helps in hard-water areas and gives longer life; the range here includes 16 brass and 11 plastic-bodied pumps. Plastic-bodied pumps are lighter and usually cheaper while still performing well in many domestic situations, so they're a good budget option for lower-demand bathrooms. If you plan to keep the pump for many years or have hard water, a brass-bodied Monsoon model is a sound investment.

A twin impeller pump gives greater capacity and steadier pressure across multiple outlets, so it's the usual choice for a family bathroom where you might run a shower and fill a bath at different times. You can see twin-impeller Monsoon and Showermate models across the 1.5-4.5 bar range in our range, so you can match power to the fixtures you use. a 2.0-3.0 bar twin impeller unit will comfortably support a shower and occasional bath-filling without the weak flow you'd get from a small single-impeller pump.