Description

We’ve all been there – you’re enjoying a nice relaxing evening, or a much-needed, calming bath when, all of a sudden, clink, bank, clatter - your cylinder or tank starts to make the most unbearable noises!

Fortunately, hope is not lost. This Salamander 1” x 22mm Compression Top Entry Flange S/FLANGE is here to help! Encouraging the air in your pump to follow a specific path to the vent, the flange prevents aerated supply water from being drawn into the pump and, as such, reduces the risk of the pump becoming noisy, breaking down, or suffering from premature temperature fluctuations.

Suitable for use with all Salamander pumps, and supplied complete with a 2 Year Manufacturer’s Guarantee, this Top Entry Flange will perform to the highest possible standard for years to come.

Product Features:

  • 1 inch x 22mm compression top entry flange
  • Suitable for use with salamander pumps
  • Reduces the risk of airlock, extra noise, and interrupted flow
  • Supplied complete with 2 year Manufacturer’s Guarantee

 

CE Approved Salamander Approved Retailer

Technical Drawings

£28.65 (Inc. VAT)

36 Available

Salamander 1" x 22mm Compression Top Entry Flange - SFLANGE Reviews

Add your own review
4.9/ 5
9 reviews
  • jaykay
    5/ 5

    my shower was sucking in air,and giving me troubles. the salamander s flange was advised. i fitted this,pretty straight forward job.just had to tweek outlet pipe up a inch or two,a bit of ptfe tape and all went back ok. this is a good bit of kit,and did what it was designed to do.also in creased flow.maybe because no are was getting in to shower. i would recommend this to anyone with air problems. i also got this delivered quickly after ordering on line.A1 service from shower pumps. will be using them again,for sure. jaykay

  • Mark D
    5/ 5

    If you have issues with poor flow/air in your pumped,indirect cylinder/tank fed,shower then this item is the solution for you. This will resolve the common error where the hot feed/draw pipe(to shower pump)has been wrongly tee’d into the top of the cylinder/expansion pipe outlet. Fitting the Sflange will prevent the draw of air (from expansion pipe) in situations where you have a minimal amount of hight(head) on your tank fed system. This item resolved my issue.thanks.