Key features:

• Odour, light & humidity sensors
• Silent operation
• Easy control via the Connect app or touch-sensitive buttons
• App controlled
• 7-year guarantee

Odour sensor

Odour Sense Technology is designed to improve the air we breathe in our homes. A sensor increases airflow when the air quality is poor or when strong odours are detected. This ensures you always have a comfortable living environment.

Silent operation

Running at just 19dB(A), the PureAir Sense is seriously quiet! A real bonus for continuous running fans as it won’t disturb you, even at night.

Humidity control

Humidity can be a real issue in certain properties so added measures to control moisture are always welcome. With the Vent-Axia PureAir Sense, a built-in humidity sensor boosts when moisture levels increase, keeping the room free of condensation. What’s more, it will even map the humidity profile throughout the year for efficient operation, meaning the fan will only run when there’s excessive moisture in the air.

App & touch panel control

Using the PureAir Sense is incredibly easy thanks to the Connect App or the touch controls on the front of the fascia.

The app is both Android and iOS compatible and allows you to alter the features remotely while the touch controls are stylishly designed into the front of the fan itself allowing you to customise the fan's functions and boost speeds.

Light sensor

As standard, these extractor fans are set for continuous operation at low speed, with an adjustable timer that can be triggered via a switch or light sensor. The light sensor recognises that someone is in the room through light movement or shadows, with a delay-on feature for those quick trips to the bathroom at night.

Adjustable timer

The adjustable overrun timer operates automatically when installed, but should you want to turn it off or adjust it you can use the Vent-Axia Connect App.

Magnetic front cover

The fan comes with a magnetic front cover that features four small magnets to allow the fan to complement any bathroom.

Easy installation

Installation couldn’t be easier either with the fan being set up by default from the factory. This means for most projects it’s just a case of fitting with minimal time adjusting settings.

Additional information:

• Low power consumption at 2-5W
• Interchangeable spigots for 100 or 125mm installations
• Easy clean with removable impeller
• Suitable for ceiling and wall mounting