Stuart Turner Showermate Standard 2.6 Bar Single Impeller Shower Pump - 46429
£130.88 (Inc. VAT)
The Stuart Turner Showermate Standard 2.6 bar Single Pump is specially designed to enhance water supplies to single taps or to pump blended water from a shower mixer. Showermate Standard pumps require a flow of just 0.8l/min, meaning even if you have a low flow rate, you will still be able to achieve the showering experience that you've always wanted! Please note that this pump is suitable for positive head applications and for domestic use only. Showermate standard pumps are suitable for installation into open vented hot and cold water systems.
The peripheral design provides pressure efficiency and the compact design is used to its benefits to reduce potential airlocking. You know that you're in good hands because this Showermate pump is manufactured by one of the UK's most popular brands of shower pumps, Stuart Turner. However, in the unlikely event that you do find that there is something wrong with your pump, you're covered by a fantastic 3-year guarantee.
Features and benefits:
- Both pump body and impeller are made from a durable and long-lasting plastic
- Automatic switching
- Fully automatic
- Continuously rated
- Offering supreme efficiency and functionality to your showering performance
- Suitable for both positive and negative head applications
- Does not require a gravity flow
- Covered by a fantastic 3-year manufactured, for that added piece of mind
- Supplied with Anti-vibration feet
- G ¾ threaded connections
- Complete with 2 flexible hoses
- 15 mm push-in flexible hoses with integral isolating valves on inlets
- EPDM/PTFE/Al. Oxide seal
- Maximum head (closed valve): 2.6 bar
- Performance at 9 l/min: 1.3 bar
- Performance at 18 l/min: 0.8 bar
- Maximum flow: 17 l/min
- Pre-wired with 1.5 metre power cable
- Length: 223mm
- Width: 132mm
- Height (excluding hoses): 179mm
3 Year Guarantee
Only Stuart Turner Offer a 3 year Guarantee on all their plastic shower pumps as standard, without the need to go through a time-consuming product registration process.
The UK’s Quietest Shower Pumps
Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available.
Anti-vibration Hoses as Standard
Supplied complete with 15mm anti-vibration hoses.
EPDM/PTFE/Aluminium Oxide Seals
PTFE and Aluminium Oxide seal materials provide the most reliable sealing solution available, reducing risk of pump leakage and resulting water damage to the home while the use of PTFE (Teflon) also reduces the chances of the seal sticking when a pump is not used for periods of time.
Stuart Turner shower pumps use less power than competitors products, saving money and the environment.
Continuously Rated Motor
Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.
Dry Run Protection
Dry run protection is really important for the wellbeing of your shower pump. Bearings and other internal parts may get seriously damaged if there is a blockage or a drop in pressure causing the pump to run dry.
Flow Switch Sensitivity
An automatic flow switch is crucial to have the shower running when it needs to be. When flow exceeds 0.8 litres per minute the pump automatically starts, delivering that powerful flow that it’s there for.
Induction Motor with auto-reset thermal trip
Thermal protection prevents dangerous overheating if the motor shaft locks or the bearings seize. It’s a valuable addition to stop your shower pump from being damaged should the worse happen and a fault occurs.
CE Marked for safety
CE marking means that the product is assessed thoroughly before it is listed for sale on the market whether that be in a shop or online. It means that the product meets certain requirements, like health and safety, to allow it to be sold.
WRAS Approved for quality
If you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.
Stuart Turner Showermate Standard 2.6 Bar Single Impeller Shower Pump - 46429 Video
Continually Evolving and Innovating
Continual investment in research and development ensures Stuart Turner remains at the forefront of design technology and innovation.
Developed the domestic shower pump market in the 1970’s.
Holders of numerous patents relating to shower pump technology including GB2494485 for Flomate and GB2349908 for mainsboost.
Four additional shower pump technology patent applications currently in progress.
Engineering Patents include everything from the Milking Machine to the 650cc water cooled, two stroke motor bike between 1912 and 1913!
Every pump is manufactured from only the highest quality components and raw materials.
Each individual pump is fully tested before leaving the factory.
All whole house, bathroom and shower pumps are WRAS approved and manufactured within ISO 9001:2008.
Guarantees that lead the industry - five years for Monsoon and Mainsboost.
|Type||Single - Hot OR Cold|
£130.88 (Inc. VAT)
|Bathrooms and Showers Direct||£150.90|
|Ergonomic Designs Bathrooms||£196.90|
Prices last checked on 17/09/2019
All prices are inc VAT and include delivery charges
Price Guaranteed For
Here at Plumbworld we love bringing you quality products at competitive prices. We are therefore happy to bring you these fantastic Stuart Turner shower pumps at their lowest price, guaranteed. With Stuart Turner, you know that you are buying a quality product that will stand the test of time. Plumbworld recommends this product!
Brilliant pump, delivered very quickly as usual. Great Service !!!!
Perfect! Easy fit & works like a dream Shower pressure fabulous