Xpelair Simply Silent Timer controlled Round Extractor Fan with fitting kit 100mm - DX100TR
4 reviews
£35.95(Inc. VAT)
✓
In Stock
FREE DELIVERY
Plumbworld has the lowest price for this product!
Description
Key Features
100mm axial extractor fan — Helps remove moisture and odours from bathrooms and cloakrooms
Timer-controlled operation — Continues extracting for a set period after the operating switch is turned off
Two selectable speeds — Offers extraction rates of 54 or 76m³/h
Low-noise performance — Sound pressure levels of 22 or 34dB(A) at 3 metres
Round fascia — Provides a simple, discreet finish
IPX4 splash protection — Suitable for Zone 1 installation when fitted according to the manufacturer’s requirements
Wall fitting kit included — Supplied with a 300mm telescopic wall tube and external grille
Compact dimensions — Measures 178.1mm high and 178.1mm wide
What’s Included
1 x Xpelair Simply Silent DX100TR 100mm timer-controlled round extractor fan
1 x 300mm telescopic wall tube
1 x External grille
Keep Your Bathroom Fresher
The Xpelair Simply Silent DX100TR helps extract humid air and unwanted odours from bathrooms, toilets, and cloakrooms. Removing moisture after bathing or showering helps reduce condensation and the conditions that encourage mould growth.
Its round fascia creates a neat finish that coordinates easily with other bathroom accessories. For anyone comparing bathroom extractor fans, it combines practical ventilation with low-noise operation.
Continued Extraction With Timer Control
The built-in timer lets the fan continue running after its operating switch has been turned off. When wired to your bathroom light switch, it can carry on removing moisture after you’ve switched off the light and left the room.
This is particularly useful after a shower, when humid air can linger even though the bathroom is no longer in use.
Two Speeds With Low Noise Levels
Two selectable speeds provide extraction rates of 54 or 76m³/h, allowing the performance to be set to suit the room. Corresponding sound pressure levels are 22 and 34dB(A), measured at 3 metres.
The lower setting offers less intrusive ventilation, while the higher setting provides increased extraction when required. Electrical power consumption is 6.6 or 7.7W, depending on the selected speed.
Axial Design With a Wall Fitting Kit
The axial design moves air through the fan along the direction of the motor shaft. This model is supplied with a telescopic wall tube and external grille for a through-wall installation.
If you’re choosing axial bathroom fans that connect to external walls, the included kit provides the main components for routing extracted air outside. Alternative wall, ceiling, or window arrangements should be checked against the manufacturer’s installation instructions and may require additional accessories.
Splash Protection for Bathroom Use
An IPX4 rating means the fan is protected against splashing water from any direction. It’s suitable for Zone 1 installation when correctly positioned and installed in accordance with the manufacturer’s requirements.
Please note: consult a qualified electrician to confirm that the location and wiring meet the applicable bathroom electrical requirements.
Technical Specifications
Duct diameter: 100mm
Extraction rates: 54/76m³/h
Sound pressure levels: 22/34dB(A) at 3m
Electrical power: 6.6/7.7W
Specific fan power: 0.45/0.37W/l/s
Speeds: 2
IP rating: IPX4
Height: 178.1mm
Width: 178.1mm
Buy Your Xpelair Simply Silent Fan Today
Order the Xpelair Simply Silent DX100TR Extractor Fan now for low-noise ventilation, timer-controlled extraction, and a wall fitting kit included.
Specifications
Back
Technical
Xpelair Simply Silent Timer controlled Round Extractor Fan with fitting kit 100mm - DX100TR – Technical Specifications
