Stuart Turner Showermate Eco Shower Pump 1.5 Bar Twin Impeller Positive Head - 46502
£103.95 (Inc. VAT)
Are you always looking for more from your shower? Is it more of a disappointing drizzle than a deluge of a waterfall? If this sounds similar then maybe you could seriously benefit from the installation of a Showermate shower pump.
This Showermate model features the more generally used twin impellers. Each impeller takes water from both the hot or the cold supplies and returns both at an equal flow.
It’s designed for domestic use with a single function shower, bath or basin mixer tap on a positive head system. A flow of just 0.8 l/min is required through the outlet to start the pump and to give you that invigorating shower you’ve always dreamed of.
Older shower pumps have often been very noisy but if you fit it with the supplied anti-vibration feet and install it in the airing cupboard then it’s possible to greatly reduce the noise levels for extremely quiet showering.
They are IPX4 rated and of course WRAS Approved for that extra protection in moisture filled environments. Any electrical work must be carried out by a fully qualified electrician.
Suitable for use in the following applications:
- Single function shower
- Basin/Bath mixer tap
- Boosting both the hot and cold water supplies equally
Features and Benefits:
- WRAS Approval and IPX4 moisture protection makes it ideal for use in the bathroom
- 3 Year guarantee provided by Stuart Turner
- Peripheral type pump
- Supplied with anti-vibration feet for noise reduction
- Durable plastic impeller and pump body
- G 3/4 inch male pump connections
- Extra quiet operation from 50dB
- Length (mm): 231
- Height excluding hoses (mm): 166
- Width (mm): 132
- Weight including fittings (kg): 4.3
3 Year Guarantee
Only Stuart Turner Offer a 3 year Guarantee on all their plastic shower pumps as standard, without the need to go through a time-consuming product registration process.
The UK’s Quietest Shower Pumps
Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available.
Anti-vibration Hoses as Standard
Supplied complete with 15mm anti-vibration hoses.
EPDM/PTFE/Aluminium Oxide Seals
PTFE and Aluminium Oxide seal materials provide the most reliable sealing solution available, reducing risk of pump leakage and resulting water damage to the home while the use of PTFE (Teflon) also reduces the chances of the seal sticking when a pump is not used for periods of time.
Stuart Turner shower pumps use less power than competitors products, saving money and the environment.
Continuously Rated Motor
Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.
Dry Run Protection
Dry run protection is really important for the wellbeing of your shower pump. Bearings and other internal parts may get seriously damaged if there is a blockage or a drop in pressure causing the pump to run dry.
Flow Switch Sensitivity
An automatic flow switch is crucial to have the shower running when it needs to be. When flow exceeds 0.8 litres per minute the pump automatically starts, delivering that powerful flow that it’s there for.
Induction Motor with auto-reset thermal trip
Thermal protection prevents dangerous overheating if the motor shaft locks or the bearings seize. It’s a valuable addition to stop your shower pump from being damaged should the worse happen and a fault occurs.
CE Marked for safety
CE marking means that the product is assessed thoroughly before it is listed for sale on the market whether that be in a shop or online. It means that the product meets certain requirements, like health and safety, to allow it to be sold.
WRAS Approved for quality
If you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.
Stuart Turner Showermate Eco Shower Pump 1.5 Bar Twin Impeller Positive Head - 46502 Video
Continually Evolving and Innovating
Continual investment in research and development ensures Stuart Turner remains at the forefront of design technology and innovation.
Developed the domestic shower pump market in the 1970’s.
Holders of numerous patents relating to shower pump technology including GB2494485 for Flomate and GB2349908 for mainsboost.
Four additional shower pump technology patent applications currently in progress.
Engineering Patents include everything from the Milking Machine to the 650cc water cooled, two stroke motor bike between 1912 and 1913!
Every pump is manufactured from only the highest quality components and raw materials.
Each individual pump is fully tested before leaving the factory.
All whole house, bathroom and shower pumps are WRAS approved and manufactured within ISO 9001:2008.
Guarantees that lead the industry - five years for Monsoon and Mainsboost.
£103.95 (Inc. VAT)
Bought this pump as it was a good price and came with a three year guarantee. Plumber found it easy to fit and it is much quieter than I expected. Overall very pleased.
From the fitting of this pump it has been working great, more powerful than my last pump also a lot less noisy. Would definitely recommend.
The Stuart Turner showermate was just what I wanted and doing a great job. Plumbworld sourced it and delivered promptly
Ordered twin pump online, very competitive price and speedy delivery, no problems, would order again
Excellent advice when we phoned for assistance. Thank you
Very quiet (mounted on rubber) shower pump. Good price.