Boost Hot and Cold Water Together

The CT Force 30TU is a twin impeller pump, meaning it boosts the hot and cold supplies together. This helps provide the balanced pressure needed by thermostatic and manual mixer showers, particularly where a gravity-fed system delivers a disappointing flow on its own.

Among twin impeller shower pumps (hot & cold), its 3.0 bar rating makes it an option for systems needing a substantial pressure boost. The right pump still depends on your water system, pipework, and the outlets you want to supply, so check the installation requirements before ordering.

Suitable for Positive and Negative Head Systems

As a universal head pump, the CT Force 30TU can operate with either positive or negative head on a suitable gravity-fed system. Positive head systems have enough natural flow to start a conventional pump; negative head installations may have too little initial flow to do so reliably. This flexibility is the main reason to consider universal head shower pumps (twin impeller) when planning an installation where the available head may be limited.

The pump can serve a range of outlets, depending on how the system is configured, including showers, basins, toilets, body jets, and certain household appliances. Have your installer confirm that the proposed outlets and water supply are suitable.

Designed to Reduce Noise

Salamander uses vibration reducing feet and materials that help dampen movement from the motor and rotating components. The included flexible connections further limit vibration passing into the pipework. The pump is Quiet Mark approved, although it will still produce some operating sound.

Electronic Switching and Crossover Protection

Solid state switching uses an electronically operated switch without moving activation parts. It is designed to improve sensitivity and reliability when the pump starts.

The crossover bypass helps manage water within the pump when one side is not supplying an outlet, such as when only the hot or cold tap is open. This helps protect the inactive side from overheating.

Regenerative Pump With Brass Ends

The regenerative pump moves water around its impeller to build pressure. Heavy-duty brass ends provide strength at the pump connections, while the continuously rated motor is designed to keep running throughout normal periods of use until the outlet is turned off.

Connections, Approval, and Warranty

Four flexible connections are supplied with 15mm-to-22mm straight push-fit couplers, brass nuts, and isolating valves. The product information also states that the pump is WRAS approved. It comes with a 5-year warranty against manufacturing defects.

Improve Your Water Pressure

Order the Salamander CT Force 30TU today if you need to boost both hot and cold water from a suitable gravity-fed system. Confirm your system and outlet requirements with your installer, then choose the pump that will give your shower the flow it needs.