Compression Top Entry Flange 1" x 22mm - SFLANGE
£31.99 (Inc. VAT)
We’ve all been there – you’re enjoying a nice relaxing evening, or a much-needed, calming bath when, all of a sudden, clink, bank, clatter - your cylinder or tank starts to make the most unbearable noises!
Fortunately, hope is not lost. This Salamander 1” x 22mm Compression Top Entry Flange S/FLANGE is here to help! Encouraging the air in your pump to follow a specific path to the vent, the flange prevents aerated supply water from being drawn into the pump and, as such, reduces the risk of the pump becoming noisy, breaking down, or suffering from premature temperature fluctuations.
Suitable for use with all Salamander pumps, and supplied complete with a 2 Year Manufacturer’s Guarantee, this Top Entry Flange will perform to the highest possible standard for years to come.
- 1 inch x 22mm compression top entry flange
- Suitable for use with salamander pumps
- Reduces the risk of airlock, extra noise, and interrupted flow
- Supplied complete with 2 year Manufacturer’s Guarantee
Compression Top Entry Flange 1" x 22mm - SFLANGE Video
£31.99 (Inc. VAT)
|Bathrooms and Showers Direct||£40.10|
Prices last checked on 24/02/2021
All prices are inc VAT and include delivery charges
Price Guaranteed For
my shower was sucking in air,and giving me troubles. the salamander s flange was advised. i fitted this,pretty straight forward job.just had to tweek outlet pipe up a inch or two,a bit of ptfe tape and all went back ok. this is a good bit of kit,and did what it was designed to do.also in creased flow.maybe because no are was getting in to shower. i would recommend this to anyone with air problems. i also got this delivered quickly after ordering on line.A1 service from shower pumps. will be using them again,for sure. jaykay
If you have issues with poor flow/air in your pumped,indirect cylinder/tank fed,shower then this item is the solution for you. This will resolve the common error where the hot feed/draw pipe(to shower pump)has been wrongly tee’d into the top of the cylinder/expansion pipe outlet. Fitting the Sflange will prevent the draw of air (from expansion pipe) in situations where you have a minimal amount of hight(head) on your tank fed system. This item resolved my issue.thanks.
Haven't tried other makes but this does the job perfectly. I was fortunate with the orientation of the pump outlet once it was tightened up, but I suppose an improved design idea would be to be able to rotate the outlet to the desired angle, banjo bolt style ...or shimming would be a cheaper option I guess. Cheapest price I could find was here on Plumbworld. Turned up fast and well packaged.
This salamander flange is essential if your fitting a shower or whole house pump. Although its not the best looking flange, they are very easy to install, I can vouch for this as I've fitted dozens of them
Excellent product and service from plumb world. Arrived in double-quick time, was competitively priced and was exactly what I needed. Will definitely use this company again. Highly recommended
Best way to supply hot water to a shower pump. Easy to fit and position because of the 2 washers supplied. Helps to comply with Salamander pumps warranty conditions.
Easy to install and works perfectly. Essential these are fitted when fitting a pump to a conventional hot water tank system to prevent air getting in the pump.
Easy to fit, no need for additional compression fittings, no need to drain cylinder, stops air drag through Hot water vent.
Worked perfectly. Haven't use any other flange and bought on the basis of matching up with a Salamander pump.
Good quality, just what was needed.Bought with the pump, thank you very much.