An anti-vibration flexible hose for your shower pump is designed to make installation much easier, connecting to your incoming and outgoing water supplies to your new pump. They’re less prone to vibration from the pump too, which should help reduce noise and prevent damage.
Suitable for Monsoon pumps
These anti-vibration shower pump hoses are only suitable for use with the Stuart Turner Monsoon pumps.
Braided hoses
Braided hoses are a great option for a number of reasons; they’re flexible, making installation a bit easier if your pump is fitted in an awkward location, they won’t corrode like copper, and they can withstand a serious amount of pressure. All great benefits when you’re using a high-pressure shower pump.
Integral isolation valves
Don’t worry about turning the whole water supply off if you need to take the pump out, simply adjust the integral isolation valve. This cuts off the water at the flexible hose for total convenience when it comes to maintenance.
Monsoon 22mm push-fit connection to pipework
Designed to work in conjunction with the Monsoon pumps, these 22mm push-fit connections are the best way to ensure a leak-free installation. The connections simply push together, creating a watertight seal.
Shop yours
Add this shower pump hose to your basket, and shop the rest of our shower pump accessories across our website to complement it.
Please note: If your hose is fitted incorrectly it may kink or split. It is crucial to make sure that pipe work is measured and cut correctly.
These replacement hoses were for a really old pump and needed four 1” nipples to make them fit. They are good quality and a lot better than the older models.
