Key Features:

• Switch operated — runs when activated from a connected wall or light switch
• Axial extraction — moves air efficiently through short duct runs
• 21 litres/second airflow — extracts up to 75.6m³ of air per hour
• 41dB running noise — provides effective everyday ventilation
• Wall or ceiling installation — offers flexibility for different bathroom layouts
• Portrait or landscape fitting — allows the front grille to suit the installation
• IPX4 rated — protected against splashing water
• Suitable for Zone 2 — when correctly installed in accordance with current regulations
• 3-year warranty — covers manufacturing defects for added reassurance

What’s Included:

• 1 x Airvent 100mm switch-operated axial extractor fan

Please note: Any ducting, external grilles or additional installation accessories required are not included unless stated separately.

The Airvent 100mm Switch-Operated Extractor Fan removes humid air from bathrooms and cloakrooms at a rate of up to 21 litres per second. Its axial design suits suitable wall and ceiling installations, while the IPX4 rating allows it to be used in Bathroom Zone 2 when correctly fitted.

Switch operation

The fan runs when activated from its connected switch and stops when switched off. It can be wired to operate with the bathroom light where the installation design permits. For continued extraction after leaving the room, consider a compatible timer or humidistat model instead.

Axial fan design

Axial blades move air in a straight line through the fan. This design is well suited to installations with short, relatively direct duct runs to the outside.

21 litres/second extraction rate

The fan extracts up to 21 litres of air per second, equivalent to 75.6m³ per hour. Regular ventilation helps manage condensation and reduce the conditions in which damp and mould can develop.

41dB running noise

With an operating noise level of approximately 41dB, the fan balances effective airflow with practical everyday use.

Flexible installation

The fan can be recessed into a suitable wall or ceiling and positioned in portrait or landscape orientation. The ducting arrangement and installation surface must meet the manufacturer’s requirements.

IPX4 and Zone 2 suitability

An IPX4 rating means the fan is protected against splashing water from any direction. It is suitable for installation in Bathroom Zone 2 when positioned and wired in accordance with the manufacturer’s instructions and current electrical regulations.

Professional installation required

This mains-powered bathroom fan must be installed by a suitably qualified electrician. The installer should confirm the bathroom zone, electrical protection, isolation and ventilation route before fitting.

3-year warranty

The Airvent extractor fan comes with a 3-year warranty against manufacturing defects, subject to the applicable terms and conditions.

Keep humid air under control with an Airvent switch-operated extractor fan from Plumbworld.