Page 4 of 4 Carron Baths

Acrylic is warm to the touch, durable and easy to clean, so it’s ideal if you want a comfortable everyday bath with low maintenance. Carronite is a reinforced finish that adds structural strength and better heat retention, so it keeps water warmer for longer and suits heavier use or a more indulgent soak. If you have a family bathroom with frequent use, Carronite gives extra longevity; for a guest ensuite or tighter budget, acrylic is perfectly capable and pleasant to the touch.

Many Carron baths on the site are 1700 x 700mm, a commonly used size that fits most family bathrooms while still offering a comfortable lie. Single-ended baths (most models here) suit installations where taps and shower are at one end, and save space for a shower screen; double-ended baths are symmetrical and better if you want a centred tap or want to lie back at either end. For a corner installation look for a side-and-end panel option; if your room is tight, a 1700 x 700 single-ended is a practical, standard choice.

If your bath sits in an alcove you’ll need a side panel for the longest side; corner baths require a side-and-end panel to cover both long and short sides. Some baths are listed with no panel option — these suit installations where the bath has a bespoke surround or will be fully tiled. For example, a 1700 x 700 bath in an alcove will usually pair with an acrylic or Carronite side panel to give a neat, finished look.

A "no tap hole" bath is supplied without pre-drilled holes, which is ideal if you plan wall-mounted or freestanding taps; tubs with tap holes suit deck-mounted mixers. "Twin grip" models include built-in grips or handholds that make stepping in and out easier and improve safety, useful if you have children or mobility concerns. Pick the tap-hole configuration that matches your intended taps, and opt for twin-grip if you want extra reassurance getting in and out.

Yes — Carron offers whirlpool options alongside standard single- and double-ended baths for a more indulgent experience. A whirlpool will need slightly more planning: you’ll want access panels for service, a suitably sized bath (many models are 1700 x 700mm or similar), and space for the pump and pipework. If you want a relaxing, spa-like bath and have room for equipment and access, a Carron whirlpool is a good upgrade; for a simple soak, a standard Carronite or acrylic bath will keep things straightforward.