The Warmup StickyMat provides even heat beneath the finished floor without requiring wall-mounted radiators. Its 200W/m² output makes it suitable for spaces where a responsive source of heating is needed.
The dual-core heating cable is already evenly spaced on the mesh, helping deliver consistent warmth throughout the covered floor area.
Low-Profile Self-Adhesive Mat
At only 1.8mm thick, the heating wire has minimal impact on the finished floor height. It is attached to a sturdy glass-fibre mesh with a pressure-sensitive adhesive, which helps the mat remain flat while the flooring materials are applied.
The adhesive allows the mat to be repositioned during installation before being pressed securely into its final position.
Quick Installation in Regularly Shaped Rooms
The 500mm-wide StickyMat rolls out in parallel runs, making it particularly suitable for square or rectangular spaces with few obstructions. This pre-spaced format can make installation up to 35% faster than fitting a loose-wire electric underfloor heating system.
StickyMat can be used with a range of suitable subfloors and floor finishes. The required insulation, covering materials, and floor build-up should be confirmed before installation.
All electrical connections must be completed and tested by a suitably qualified electrician in accordance with the manufacturer’s instructions and current regulations.
SafetyNet Installation Cover
Warmup’s SafetyNet scheme provides extra reassurance during fitting. If the heating mat is accidentally damaged during installation, it can be returned to Warmup for replacement with another heater of the same make and model, subject to the scheme’s terms.
Warmup also received an EcoVadis Bronze Medal for sustainability in 2023.
Upgrade Your Home Heating
Choose the Warmup StickyMat for efficient underfloor heating, straightforward self-adhesive installation, and reliable coverage over a 6m² area.
Warmup StickyMat Underfloor Heating System 200W/m² - 6m²Video