The Warmup StickyMat provides discreet heating beneath the finished floor, distributing warmth throughout the room without using valuable wall space. Its 200W/m² output makes it particularly suitable for areas where responsive heat is required.
The heating cable is pre-spaced on the mesh, helping provide consistent coverage throughout the selected floor area. Its dual-core design and slender 1.8mm profile also keep additional floor build-up to a minimum.
Quick Self-Adhesive Installation
A pressure-sensitive adhesive covers the glass-fibre mesh, helping it remain flat against the subfloor while tile adhesive or another suitable covering is applied. The mat can still be repositioned during installation before being pressed securely into place.
At 500mm wide, the StickyMat can be rolled out in parallel runs through regularly shaped rooms. This can make installation up to 35% faster than fitting a loose-wire electric underfloor heating system.
Suitable for Different Floors
StickyMat can be used with a range of suitable floor finishes and subfloor types. The exact build-up, insulation requirements, and installation materials should be confirmed before fitting to ensure the system performs correctly.
All electrical connections must be completed and tested by a suitably qualified electrician in accordance with the installation instructions and current regulations.
SafetyNet Installation Cover
Warmup’s SafetyNet installation cover provides additional reassurance while the system is being fitted. If the heating mat is accidentally damaged during installation, it can be returned to Warmup for replacement with another heater of the same make and model, subject to the scheme’s terms.
Upgrade Your Home Heating
Choose the Warmup StickyMat for efficient underfloor heating, a low-profile self-adhesive design, and fast installation over a 10m² area.
Warmup StickyMat Underfloor Heating System 200W/m² - 10m²Video