Please note: this cable must be used with a DCM-PRO mat, which is purchased separately. Floor coverings must be certified as suitable for underfloor heating.

Flexible Underfloor Heating for Your Room

The Warmup DCM-PRO cable gives you flexibility when planning heating around fixed fittings and awkward room shapes. Rather than following a pre-spaced mesh layout, the cable fits into the DCM-PRO mat, allowing its route to suit the usable floor area.

This makes it a practical option for bathrooms and other rooms where fixtures interrupt the floor space. At three-castellation spacing of 90mm, this model covers 5m² and delivers 150W/m², with a total output of 750W.

Compatible With a Wide Choice of Flooring

The system can be covered with an appropriate self-levelling compound, allowing it to work beneath several flooring types. Suitable finishes include tiles, stone, polished screed, wood, engineered timber, laminate, vinyl, carpet, rugs, and rubber, provided the chosen covering is approved for underfloor heating.

This flexibility lets you plan electric underfloor heating around your preferred finish. Follow the flooring manufacturer’s temperature limits and Warmup’s installation requirements when specifying the complete floor build-up.

Tool-Free Cable Fitting

The flexible cable presses into the DCM-PRO mat without tools, with the castellations helping guide placement and spacing. Adjusting the spacing changes the coverage and heat output per square metre, allowing the installation to be planned for the room’s requirements.

The cable itself is 4.5mm thick and features advanced fluoropolymer ETFE inner insulation. A 3m coldtail provides the connection length for your installer.

Lifetime Warranty and Installation Protection

The cable comes with a lifetime manufacturer’s warranty for long-term reassurance. Warmup’s SafetyNet installation protection also offers a replacement of the same make and model if the heater is accidentally damaged during installation, subject to the scheme’s terms.

Warmup was awarded an EcoVadis Bronze Medal in 2023 for its sustainability performance.

Technical Specifications

• Total output: 750W
• Coverage: 5m² at 150W/m²
• Cable spacing: 3 castellations — 90mm
• Operating voltage: 220–240V, 50Hz
• IP rating: IPX7
• Cable colour: Blue
• Cable thickness: 4.5mm ±0.2mm
• Inner insulation: Advanced fluoropolymer — ETFE
• Minimum installation temperature: 5°C
• Coldtail length: 3m
• Approvals: BEAB approved and CE marked
• Required mat: Warmup DCM-PRO

Buy Your Warmup DCM-PRO Cable Today

Order the Warmup DCM-PRO 5m² Heating Cable now and enjoy underfoot warmth with a flexible layout designed to suit your room.