Silverline PTFE Tape is a non-adhesive tape which can be used with threaded fittings and compression joints on all types of water pipes, including drinking water, up to 85°C. It lubricates threaded joints whilst installing the pipes to enable a tighter and deeper connection, which helps to prevent bi-metal corrosion – no more leaking pipes!

Features and Benefits:

• WRAS Approved
• X 1 Roll of PTFE Tape
• Complies with BS7786 2006
• 12m x 12mm x 0.075mm
•  PTFE water tape is a non-adhesive tape for use with threaded fittings and compression joints on all types of water pipes
• Remove any dirt, grease or metal shavings from threads. Apply the PTFE tape on the joint following the inclination of the thread overlapping by ½ to ¾ tape width (depending on thickness required). Apply tape with an even firm tension to ensure tight fitting around the thread.
• Provides watertight seal for water-pipe fitting and installation work. Helps prevent bi-metal corrosion in threaded joints. Lubricates threaded joints during assembly and helps prevent bi-metal corrosion. Suitable for cast iron, steel, alloys, plastic, brass and ceramics. Length 12m. Complies with BS 6920-1:2000 and BS 7786:2006