Saniflo Sanispeed + Commercial Grey Water Lifting Station - 6045
£417.99 (Inc. VAT)
How it Compares To The Competition
A 3 inlet macerator connects to a toilet and 1 of the following products:
Inlet size: 40mm
Outlet size: 32mm
- Wastewater discharge pump suitable for use with showers, baths, sinks, bidets, washing machines and dishwashers
- Ideal for use in light commercial settings
- Four inlets for multiple connectivity in all types of bathroom suites
- Capable of pumping vertically up to 7.5m and horizontally up to 70m through 30mm pipework
- Complete with carbon filter to neutralise unpleasant odours
- With a five-year warranty as standard
The Saniflo Sanispeed + Commercial Grey Water Pump 6045 is the ideal choice in wastewater discharge pumps for light commercial settings, such as small- to mid-sized shops, offices, cafes, bars and dental surgeries. With four inlets (two entries on top and two on the side), it can be connected to four different utilities at once, and is compatible with all sinks, wash basins, bidets, showers, baths, washing machines and dishwashers. As such, it represents the cutting edge in light commercial wastewater discharge pump solutions.
The unit’s diminutive dimensions and attractive design means it can be installed unobtrusively in any location and comes equipped with floor brackets to prevent movement during operation. All electrical wiring should be undertaken by a qualified professional and meet international standards, and the unit should be positioned in a place where it is easily accessible to conduct maintenance. To ensure maximum longevity of the pump, it’s advisable to clean it thoroughly every few months, as heavy usage can lead to an accumulation of grime, grease and other unwanted detritus.
The average working temperature of the unit is 35°C, though it is capable of handling water as hot as 75°C for up to five minutes (such as the discharge of hot water from a dishwasher at the end of its cycle). If hot water continues to flow through the system for an extended period of time, the pump has an automatic shut-off switch to prevent the motor from overheating. However, it will automatically resume functions once the motor has cooled sufficiently, which normally takes around one hour.
The unit can pump wastewater vertically up to 7.5m and horizontally up to 70m through the supplied 30mm pipework, making adequate drainage as simple as possible. It also now comes equipped with a carbon filter installed as standard, neutralising unpleasant odours and increasing the unit’s overall performance. With a five-year warranty included on every purchase, the Sanispeed + is engineered to provide reliable drainage of light commercial utilities for years to come, and represents the ideal choice for those looking for wastewater discharge solutions in a smaller public setting.
- Pump (Vertically): 7.5 metres
- Pump (Horizontally):70 metres
- Discharge & Pipework: 32mm
- Inlet Pipework: 40mm
- Motor Power: 400 Watts
- Flow Rates: 100 litres/min
- Depth: 190mm
- Width: 368mm
- Height: 320mm
Caution – Do Not Exceed Waste Water Temperature Limits
The Sanispeed+ has a working temperature of 35ºC, it will handle temperatures up to 75ºC for short periods.
If connecting a dishwasher or washing machine to a Sanispeed you will need to ensure that the appliances are not run on hot water cycles which exceed these limits. If you need a Lifting Station that is designed to operate at higher temperatures click here
Saniflo Do Not Accept Returns
If your Saniflo macerator is faulty then you will need to call out an approved Saniflo engineer. Saniflo will not accept returned product for hygiene reasons and require any fault to be verified on site by the engineer. Engineers aim to be with you in 48 hours although longer delays are possible
5 Saniflo Problems and How To Fix Them
You may not need to replace an old Saniflo unit. Below are five common problems associated with Saniflo brand macerators and some quick tips on how you can fix them.
The Saniflo Is Giving Off a Terrible Smell !
Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that’s always left in the Saniflo. Other Macerator brands have self-cleaning technology, but Saniflo’s need to be descaled regularly. If you’ve never descaled your macerator then you may have to do this a few times to clear the smell.
The Saniflo Keeps Tripping The Electrics
If your Saniflo is tripping the electrics, it usually means that water is getting into it and leads to the circuit shutting off to avoid any other damages, or there’s a loose wire. Always make sure the electrics are off before you inspect the pump. If there’s an issue with the motor seal, then call a certified Saniflo engineer to repair it. If the motor is worn or faulty, this unfortunately means that you’ll have to purchase a new macerator.
Saniflo Leaks During Operation
One reason for your Saniflo leaking from the vent could be that there is a big build up of waste inside which will have to be manually removed.
It’s also possible that the motor is nearing the end of its life and can’t work as hard as it used to. This would mean the whole macerator should be replaced.
The rubber waste outlet could have shrunk because of too much toilet cleaner. If water is spraying out the vent, you will need to replace the rubber waste outlet.
The Saniflo Starts On its Own!
There could be a few reasons as to why your pump keeps starting on its own throughout the day and night: (Excluding the possibility of a ghost!)
The microswitch is misfiring because it keeps thinking the tank is full – you will have to manually remove the waste between the switch and the tank floor and then reset the pump. If the rubber membrane is damaged, waste can then get into the switch and cause a problem. In this case, you will have to purchase a new rubber membrane and switch.
Saniflo Vibrates & Buzzes Loudly
If when flushing the toilet you hear a horrible vibrating noise, there’s probably something that has been lodged in the macerator blade. Turn off the Saniflo and remove the lid. If you see an obstruction straight away, remove it. If the foreign object is in the blade you can remove it using small pliers.
|Noise Level||46 db|
|Maximum Vertical Discharge||7.5 M|
|Maximum Horizontal Discharge||70 M|
|Max Water Temperature (Continuous)||35 C|
|Max Water Temperature (Intermittent)||75 C|
£417.99 (Inc. VAT)
|QS Bathroom Supplies||£450.10|
Prices last checked on 27/09/2021
All prices are inc VAT and include delivery charges
Price Guaranteed For
Also Worth Considering
Great product does exactly what it says coupled with a prompt delivery service, very happy would use Plumbworld again and again
Good product from Saniflo. Does what it should all day long, as long as it is used correctly.
Absolutely super fast delivery , pleasant traansation I will order again. Thanks
Excellent product I would buy again especially from Plumbworld