The Mira Elite SE 9.8kW Pumped Electric Shower is designed specifically for homes with a gravity-fed cold water supply where conventional electric showers may not receive enough pressure to perform effectively. An integrated pump boosts the incoming water to provide a strong and consistent shower flow, even when the available pressure is low.

Because the Elite SE heats water electrically as you shower, it only requires a suitable cold water supply rather than stored hot water.

Important: This shower must be connected to a suitable gravity-fed cold water storage tank. It must not be connected directly to the mains cold water supply.

Reliable 9.8kW Performance

The 9.8kW rating provides reliable electric shower performance, heating the incoming cold water as it's required. This means there's no need to wait for a cylinder of hot water to heat before showering.

The built-in pump is what sets the Elite SE apart from standard mains-fed showers, boosting the low-pressure tank supply to provide a more satisfying and consistent flow.

Quiet Mark Approved Pump

The Mira Elite SE is Quiet Mark approved, recognising its quieter operating performance despite having an integrated pump.

This makes it particularly useful in households where people shower early in the morning or late at night and you want to keep unnecessary noise to a minimum.

Four Spray Patterns

The large showerhead offers four distinct spray patterns, allowing you to change the feel of your shower to suit your preference:

• Saturate — Broad everyday coverage
• Soak — A fuller showering spray
• Stimulate — A more invigorating spray
• Soothe — A gentler showering experience

Simply switch between the different settings whenever you want a change.

Rub-Clean Showerhead

The showerhead features rub-clean nozzles, making routine maintenance much easier. Limescale and other deposits can be removed by rubbing the flexible nozzles, helping maintain good spray performance over time.

Mira Clean-flo™ Filter

The Elite SE features Mira's Clean-flo™ filter, which helps protect the internal components of the shower from debris and limescale.

The filter is removable and designed for easy access and cleaning, helping you maintain shower performance without making routine maintenance unnecessarily complicated.

Simple Separate Controls

A dedicated on/off push button lets you start and stop the shower without needing to reset your preferred settings each time.

Separate flow and temperature controls make it straightforward to adjust the shower to suit your preference.

Designed for Low-Pressure Cold Water Supplies

The Mira Elite SE has been developed specifically for low-pressure, gravity-fed cold water systems. This makes it a specialist choice for properties where the shower is supplied from a cold water storage cistern rather than directly from the mains.

It's important to identify your water system correctly before purchasing, as this model isn't suitable for direct connection to a mains cold water supply.

Electrical Installation

As a 9.8kW electric shower, the Elite SE requires an appropriately rated dedicated electrical circuit. The final cable size and protective devices must be determined according to the installation conditions, Mira's instructions and current electrical regulations.

Installation should be carried out by a suitably qualified person.

2-Year Warranty

The Mira Elite SE 9.8kW Pumped Electric Shower comes with a 2-year manufacturer's warranty, giving you added reassurance with your new shower.

Choose the Mira Elite SE 9.8kW when you need the convenience of an electric shower with a low-pressure, gravity-fed cold water supply, combining an integrated pump with quiet operation, four spray patterns and practical easy-clean features.