Clear, wall-mounted design

Mounting the tap above the basin leaves the rim free from tap bodies and base plates. This creates a minimalist appearance and removes the tight spaces around deck-mounted fittings where water and residue commonly collect. The format is particularly well suited to countertop basins, vessel basins and models manufactured without tap holes.

Independent lever controls

Separate levers regulate the hot and cold supplies before the water is mixed at the spout. The controls sit on round 50mm plates, with clear hot and cold markings on their faces. Their symmetrical arrangement gives the tap a considered appearance while allowing each supply to be adjusted precisely.

Long basin spout

The 231mm projection carries the outlet over the rim of a countertop basin. Correct positioning is important: the outlet should sit over the bowl at a height that provides comfortable hand clearance without creating unnecessary splashing.

Polished chrome finish

Chrome plating gives the tap a bright, reflective surface that coordinates easily with matching wastes, bottle traps and bathroom accessories. Its smooth finish is straightforward to wipe clean with a soft cloth.

Standard pipework connections

Both inlets use standard ½-inch BSP connections. Because the working components sit within the wall, the pipework and tap body must be accurately positioned before the wall is closed and finished.

Installation by a suitably qualified plumber is recommended. Check the basin position, spout reach and finished wall thickness before fitting.

5-year warranty

This Merano wall-mounted basin mixer tap comes with a 5-year warranty against manufacturing faults. Terms and conditions apply.

Upgrade your basin today

Create a clean, contemporary basin area with Merano wall-mounted taps from Plumbworld.