The Geberit Monolith sanitary module for wall hung toilets is a brilliant way to modernise your bathroom without major renovation work. Its slim, minimalist design hides all the plumbing and cistern components behind an attractive glass panel which doesn’t just look clean and elegant, but also makes it ideal for bathrooms where space is tight.
If you’re aiming for a fresh, updated look that doesn’t ask you to tear up walls, this module is a fantastic option that gives you everything you could ask for.
Dual Flush
With the Monolith’s dual flush system, you get the choice of a light flush for liquid waste or a stronger one for solids – it’s a simple but clever way to save water without sacrificing efficiency. It also helps reduce your water bills while being more environmentally friendly, so having the option at your fingertips and being able to conserve water every day is one of those small but impactful changes you can feel good about.
Fully Insulated Concealed Cistern
What really sets the Geberit Monolith apart is its self-supporting, concealed cistern. No extra wall support is needed, making installation easier, and it’s fully insulated to prevent condensation. That means no annoying drips or damp issues, even in a busy bathroom.
Application Purposes
Renovations, conversions, and new builds
Wall inlets with inlet height of >23cm
Replacement for low-level exposed cisterns
Replacement for wall hung WCs with close-coupled exposed cisterns
Connection for Geberit AquaClean Tuma WC complete solutions
Connection for Geberit AquaClean WC enhancement solutions
Mounting on finished floors
Compensating the offset between WC connections and wall drains using a stepped straight connector for wall hung WCs
Installation in front of drywalls or solid walls
Additional Information
Minimum operating pressure 0.1 bar
Maximum operating pressure 10 bar
Operating temp: 25o
Large flush is adjustable from 4.5 to 6 litres
Water supply connected on the bottom (connection on left/right possible with accessories)
Water supply connection set with 2 angle stop valves, 1/2"
Flush bend extension 160 mm
Sleeve made of EPDM, ø 44 / 55 mm
Connection bend made of PP, ø 90 mm
Adaptor socket made of PE-HD, ø 90 / 110 mm
2 threaded rods M12
Sound insulation set
Base cover
Fastening material for drywall
Fastening material