Add a dash of luxury to your bathroom with these stunning Diamond Walk-in Shower Screens. Designed for your convenience, this walk in shower enclosure prevents water from spraying onto your floors. With a beautiful finish, these walk in screens are sure to be the star of your bathroom, boasting a sleek and minimalistic aesthetic.
Frameless Design
Frameless wet room screens have a high-end look and a minimalistic design style, requiring only wall channels to fix to your bathroom walls. They make your bathroom look and feel bigger while taking up the same amount of space as a framed screen.
Extra Tall 1950mm Glass Panels
Standard shower enclosure panels tend to be 1750 - 1800mm high, but these are a full 1950mm high giving you extra splash protection and a fantastic high-end look.
8mm Thick Thermally Toughened Safety Glass
The 8mm glass used is of the highest standard. It conforms to EN12150-1 meaning that it's been rigorously tested and thermally toughened for superior safety and strength.
Support Bars Included
Holding this beautiful piece of glass in place are equally stylish support bars. They're finished in a modern chrome and bring a lot of extra support to your new wet room enclosure. The included support arms measure 1m and can be easily cut to size.
Easy Clean Glass Panels
A special coating has been applied to the glass panels to ensure cleaning is fast and easy. A simple wipe down will bring back crystal clear glass time and time again.
Left or Right Hand Orientation
Wet room screenshower enclosures can be fitted easily into either the left or right hand corners of your bathroom, allowing convenient entry no matter the existing layout.
Quick & Easy Installation
These shower panels have been designed so that fitting is quick and easy for your bathroom installer. This means you'll be enjoying your new shower enclosure before you know it!
High-Quality CE Marked Product
These shower enclosures are built to an extremely high standard. They’re CE tested to comply with BS EN 14428 meaning they’ve been put through rigorous testing for use on the UK market.
Our shower trays are built with durability and performance in mind, with each one tested to support up to 4000kg, whether used with or without our own supplied riser leg kits. A typical 1200 x 800mm tray weighs just 18kg, making it significantly lighter than many stone resin options.
In terms of standards and sustainability, our trays are fully compliant with all UK and EU requirements, including CE, EN 14527, EN 198, and REACH regulations. While WRAS certification isn’t required for trays, our acrylic sheet is manufactured to EN 263 for domestic use. Unlike some alternatives, we don’t use chipboard or other wood-based reinforcement materials – instead, we use Flax Particle Board, a more environmentally friendly alternative that offers strength without compromising on sustainability.
Moreover, while it is possible to cut an acrylic capped tray, please note a cut edge is potentially exposed to water ingress.
High-Flow Waste
Rate of 32 litres per minute.
Standard 40mm connection
Vented dome to allow higher flow
Top access for easy maintenance
Quick-release inner unit for ease of cleaning
Chrome top
Important installation information: Please note, it's important to consider the minimum and maximum adjustment measurements. The enclosure doesn't sit flush to the side of a shower tray as this allows space for tiling.
Specifications+
Back
Technical
Diamond Walk In Shower Screens with 1400 x 900mm Tray - 8mm Chrome – Technical Specifications
After looking at other sites, I finally found the whole package from Plumb Worlld . There is so much choice , I choose the chrome fittings with hinged door , as it is 1700 x 800. Having now used it , since installed . I highly recommend this product , and would recommend its purchase .
Delivered on the date and time frame , as it was Pallett delivery , with other items , I had bought from them . I highly recommend Plumbworld
