Xpelair Simply Silent Timer controlled Round Shower Fan with fitting kit 100mm - DX100BT
£36.88 (Inc. VAT)
Extractor fans with a built-in timer control means that the fan will operate with the bathroom light switch and then overrun for a set amount of time to continue removing moisture from the air. This is great for steamy bathrooms, allowing you to turn the light off but continue with extraction for a short time.
Recessed fans can be installed through a wall, window or alternatively the ceiling giving you that extra bit of flexibility.
Axial type fans cause gas to flow through in an axial direction which is parallel to the shaft where the blades rotate, making the flow axial at exit and entry. Axial fans are designed to create a pressure difference and force which produces a flow through the fan.
This product has a rating of IPX4 which means it is protected from water splashes from any angle.
Zone 1 Rated
IP rating stands for 'Ingress Protection rating' and this helps us determine what bathroom electricals can go in particular bathroom zones. An IP (Ingress Protection) number or code is used here in the UK to specify the environmental protection of enclosures around electronic equipment. These ratings are determined by specific tests.
These extractor fans can be fitted within Zone 1 as shown below.
Use in a Cloakroom or Bathroom
This type of fan is suitable for use in a cloakroom and a bathroom to give you an excellent flow rate.
It’s the perfect combination of low noise levels and high rates of extraction. This Simply Silent shower fan has been purposely designed for installation above a shower. They provide direct extraction at the point of highest humidity for a steam-free bathroom.
This 4" 100mm extract fan comes complete with a beautiful round fascia, designed to blend subtly with your bathroom ceiling and operated by a switch or remote sensor.
The greater part of noise created by an extractor fan is usually the motor or, believe it or not, the movement of air through it. Xpelair has created Ghost Air Movement Technology to tackle this. They are made from the precision engineered parts coupled with a silent motor to make sure you don’t disturb the rest of the house while showering.
Also featured is an integral timer which can be adjusted at installation from 30 seconds to 30 minutes depending on how misty your bathroom gets.
Supplied with a ceiling fitting kit which includes 3 metres of flexible ducting and white grille to be fitted externally.
A 2 year guarantee gives you that extra peace of mind.
Features and Benefits:
- Extremely quiet operation.
- 88% improved rate of extraction over other similar inline fans.
- Suitable for installation in zone 1.
- IPX4 rated.
- ErP compliant.
- 2 Year guarantee provided by Xpelair.
- Extract Performance: 54/76 m3/h
- Specific Fan Power: 0.45/0.37 W/I/s.
- 3 metres of flexible ducting.
- White external grille.
|Overall Depth||41 mm|
|Protruding Depth||36 mm|
|Fan Size (Metric)||100 mm|
|Fan Size (Imperial)||4 Inches|
|Max Flowrate||21 Lts/sec|
|Max Noise Level||34 Db|
|Bathroom Installation Zone||Zone 1|
|Installation Kit Included||Yes|
|Room Suitability||Toilet + Bathroom|
£36.88 (Inc. VAT)
Interest Free in 4 Easy Payments
An excellent product at a really good price from plumbworld, speedy delivety too.
Easy to fix great full kit and best value for money l found
Not too bad an extraction if it is set to maximum, at which point it can be a bit noisy.
works well, silent but I expected it to be a lot more quieter
Easy to install & quiet in use, would recommend, thumbs up!