Leave the Steam Behind

Switch off the light and let the fan carry on clearing the air. This Airvent shower extractor operates with your bathroom light switch, then runs for a set period afterwards to help remove lingering humidity.

With an extraction rate of 24 litres per second, it helps reduce condensation and the damp conditions that encourage mould growth.

Extract Moisture Where It Starts

Inline shower extractor fans sit within the ducting system, typically in the loft. This allows the extraction inlet to be positioned directly above the shower or bath, helping capture moist air close to its source.

The arrangement keeps the fan unit out of the bathroom itself, making it a practical choice when planning ventilation and other bathroom accessories.

IP44 Splash Protection

The fan’s IP44 rating provides protection against solid objects larger than 1mm and water splashes from any direction. Its 100mm format is designed for a compatible ducting installation.

Zone 1 Rated

IP rating stands for 'Ingress Protection rating' and this helps us determine what bathroom electricals can go in particular bathroom zones. An IP (Ingress Protection) number or code is used here in the UK to specify the environmental protection of enclosures around electronic equipment. These ratings are determined by specific tests.

These extractor fans can be fitted within Zone 1 as shown below.

Please note: Electrical products installed in these zones must meet the required IP rating. Always consult a qualified electrician to ensure compliance.

Buy Your Airvent Shower Extractor Fan Today

Order the Airvent Timer Controlled Shower Extractor Fan 100mm 434446A now from Plumbworld and put our extractor fans to work clearing the air after your shower.