Key Features:

• Timer-controlled operation — Continues extracting for a set period after the light is switched off
• High extraction rate — Moves up to 61 litres of air per second
• Quiet performance — Stated noise level of 27dB
• Inline design — Installs remotely within a loft or ducting system
• Direct moisture extraction — Allows the inlet to be positioned close to a bath or shower
• Multiple-inlet capability — Can serve more than one extraction point when correctly specified
• IPX4 rated — Protected against splashing water
• Zone 1 suitable — When correctly positioned and installed
• Room suitability — Kitchens and bathrooms
• Installation kit included
• 3-year guarantee

What’s Included:

• Timer-controlled inline extractor fan
• Installation ducting
• Fascias
• Wall-fixing components

This Timer-Controlled Inline Extractor Fan provides powerful ventilation for kitchens and bathrooms while keeping the motor unit concealed within a loft or ducting system. Its high airflow and remote installation help remove moisture efficiently with minimal disruption in the room.

Timer-controlled extraction

The fan can operate with the room’s light switch and continue running for a set period after the light is turned off. This helps remove steam and moisture that remain in the air after the room has been used.

Powerful 61l/s airflow

An extraction rate of up to 61 litres per second—equivalent to approximately 220m³/h—makes the fan suitable for busy bathrooms and kitchen environments where higher airflow is required.

Quiet inline operation

Positioning the motor remotely within the loft or ducting helps reduce the noise heard inside the room. The fan has a stated operating noise level of 27dB.

Direct extraction at the source

The intake grille can be positioned close to the bath or shower, allowing steam to be drawn away near its source before it spreads around the room. This helps manage condensation and moisture build-up.

Multiple extraction points

When incorporated into a suitably designed ducting system, one inline fan can support more than one inlet. This can provide ventilation at multiple points without requiring a separate motor for each grille.

IPX4 and Zone 1 suitable

The IPX4 rating provides protection against water splashes from any direction. The system is suitable for a Zone 1 installation when all components are correctly positioned and fitted in accordance with the applicable electrical requirements.

Always use a qualified electrician to confirm suitability and complete the electrical installation.

Installation kit included

The supplied fixing kit includes ducting, fascias and wall-fixing components to support a straightforward installation.

3-year guarantee

The fan is covered by a three-year guarantee against manufacturing defects, providing added reassurance in its quality and performance.

Improve your room ventilation

Add this Timer-Controlled Inline Extractor Fan to your basket today for powerful airflow, quiet remote operation and effective moisture removal.