Type 11 panel and convector design

A Type 11 radiator contains one water-filled panel and one convector. The panel radiates heat into the room, while the convector increases the surface area available for warming the surrounding air.

This configuration provides greater heat output than a plain single-panel radiator while remaining slimmer than many double-panel alternatives.

Suitable for compact spaces

The relatively slim projection makes this radiator well suited to narrower rooms and circulation spaces. It can provide effective heating without extending as far from the wall as a deeper radiator.

Pre-fitted grille and side panels

Factory-fitted side panels and a top grille conceal the internal convector and give the radiator a neat, finished appearance. Their ventilated design allows warmed air to circulate without unnecessarily restricting performance.

Wall-mounting hardware included

Heavy-duty L-shaped brackets are supplied for wall-mounted installation. The brackets attach directly to a suitable wall, and the radiator hangs from the holders fitted to its rear.

An air vent, blind plugs, fixing screws and screw caps are also included.

Standard G1/2-inch connections

The radiator features G1/2-inch threaded connections for use with compatible UK plumbing fittings. This makes it suitable for connection to many conventional central-heating systems.

Check the pipe positions and select suitable valves before installation.

BS EN 442 conformity

The radiator conforms to BS EN 442, the recognised standard covering the performance and testing of radiators used with hot-water heating systems.

Choose the correct output

Radiator selection should be based on the room’s heat-loss requirement rather than dimensions alone. Factors such as room size, insulation, glazing and external walls will affect the output needed.

10-year guarantee

The radiator is covered by a ten-year guarantee against qualifying manufacturing defects, subject to the manufacturer’s conditions and exclusions.

Add efficient heating with a slim profile

Choose the Prorad Type 11 Single-Panel Convector Radiator for practical wall-mounted heating, enhanced convector output and a neat factory-finished appearance.