Type 11 panel and convector design

A Type 11 radiator contains one water-filled panel and one convector. The panel radiates heat into the room, while the convector increases the surface area available for warming the surrounding air.

This arrangement produces more heat than a plain single-panel radiator while remaining slimmer than comparable double-panel configurations.

Suitable for compact spaces

The relatively slim projection makes the radiator useful in narrower rooms and circulation areas. It provides effective heating without extending as far from the wall as a deeper Type 22 model.

Suitability depends on the selected radiator size, stated heat output and the calculated heat loss of the room.

Pre-fitted grille and side panels

Factory-fitted side panels and a top grille conceal the internal convector and give the radiator a neat, finished appearance. Their ventilated design allows warmed air to circulate through the radiator.

Wall-mounting hardware included

Heavy-duty L-shaped brackets are supplied for wall-mounted installation. The brackets attach directly to a suitable wall, and the radiator hangs from the holders fitted to its rear.

An air vent, blind plugs, fixing screws and screw caps are also included.

The supplied fixings may not be suitable for every wall construction. Use fixings appropriate to the wall material and the filled weight of the radiator.

Standard G1/2-inch connections

The radiator features G1/2-inch threaded connections for use with compatible UK plumbing fittings. Check the pipe positions and select suitable radiator valves before installation.

BS EN 442 conformity

The radiator conforms to BS EN 442, the recognised standard covering the testing and declared performance of radiators for hot-water heating systems.

Choose the correct heat output

Radiator selection should be based on the room’s heat-loss requirement rather than dimensions alone. Room size, insulation, glazing, external walls and system temperatures will all affect the output needed.

A qualified heating professional can calculate the required output and confirm system compatibility.

10-year warranty

The radiator is covered by a ten-year guarantee against qualifying manufacturing defects, subject to the manufacturer’s conditions and exclusions.

Add effective heating with a slim profile

Choose the Prorad Type 11 Single-Panel Convector Radiator for enhanced convector output, standard UK connections and a neat factory-finished appearance.