Key Features
- Fits a 100mm kick space — adds heating beneath your kitchen units while keeping walls free
- 3kW heat output — warms the room quickly when you need it
- Wireless control — lets you adjust the heating using a compatible Consort wireless controller, sold separately
- Black facia — blends neatly with darker kitchen units and plinths
- Heat and fan-only settings — gives you a choice of warmth or air circulation without heat
- Automatic safety cut-out — switches the heater off if it overheats
- 600mm-wide facia — fits beneath kitchen cupboards measuring 600mm wide or more
- 1-year warranty — gives you added reassurance with your purchase
What’s Included
- 1 x Consort Claudgen Wireless Controlled Plinth Heater in Black
- Facia fixing screws
Please note: A Consort wireless controller is sold separately. The heater will not operate without one.
Kitchen Heating Without Losing Wall Space
Finding room for a radiator can be tricky when your kitchen walls are already full of cupboards and appliances. This Consort Claudgen heater makes use of the kick space beneath your units instead, with just the slim black facia left on show.
It delivers 3kW of fan-assisted heat at floor level and can also be fitted beneath counters, stairwells, and suitable fitted furniture in homes or commercial spaces.
Quick Warmth Where You Need It
The fan draws air in and sends warm air back into the room through the front grilles. When you want air circulation without the warmth, a switch on the facia turns off the heating elements so the fan can run on its own.
Control It From Elsewhere in the Room
Pair the heater with a Consort wireless controller to adjust the heating without bending down to the plinth. If you’re fitting several plinth heaters in a larger space, one controller can operate them all, provided they’re within range.
A Neat Fit Beneath Your Units
The heater slides through a cut-out in the plinth board, and the facia screws into place from the front. It needs a kick space at least 100mm high and a cupboard above measuring at least 500mm deep.
Built-In Safety Monitoring
An automatic thermal cut-out switches the heater off if it overheats, including when airflow is blocked. The LED status light uses flash patterns to identify faults, helping an engineer diagnose the problem.
Installation Information
The heater connects to a 230/240V single-phase supply through a switched, fused double-pole isolator and should be installed by a suitably qualified electrician.
Additional Information
- Facia width: 600mm (23.6in)
- Minimum kick space height: 100mm (3.9in)
- Minimum cupboard depth: 500mm (19.7in)
- Fitted supply cable: 2.2m (7.2ft)
- Weight: 2.5kg (5.5lb)
Shop Consort Claudgen Electric Plinth Heaters
Order the Consort Claudgen PHSL3BL from Plumbworld today and put the space beneath your kitchen units to work.
