Key Features:

• Single deep bowl — gives you one wide space to work in
• Three working levels — a board or colander sets in the bowl
• Igneous granite composite — 80% quartz bound with 20% acrylic
• Matt cloud finish — the same colour inside and out
• One 35mm tap hole — on the ledge behind the bowl
• 800mm minimum base unit — suits a standard run of units

Warranty:

• 25 years

What's Included:

• 1 x Rangemaster Prato Kitchen Sink
• 1 x 90mm basket strainer waste
• 1 x overflow kit
• Please note: a kitchen tap is not included.

Keep the worktop clear with the Rangemaster Prato Inset Single Bowl Granite Cloud Kitchen Sink. Three sets of steps are moulded down the bowl walls, so a sliding board, colander or drainer sits at the rim, part way down, or across the base.

That turns the sink itself into the preparation space. The bowl is 200mm (7.9in) deep, the sink measures 790 x 386mm (31.1 x 15.2in), and it drops into a worktop cut at 770 x 480mm (30.3 x 18.9in).

Single Deep Bowl

One bowl, 200mm (7.9in) deep, with square corners. Nothing divides it, so the full width is usable with the accessories off.

Three Working Levels

The three levels let you rinse at one height and chop at another over the same bowl. An accessory lifts straight out when the full depth is wanted.

Igneous Granite Body

Igneous granite is a composite of 80% quartz bound with 20% acrylic, and this sink is moulded from it in one piece. The colour runs right through the material, so a chip shows the same shade as the surface.

Matt Cloud Finish

Cloud is a matt mid-grey. The finish is the same on the ledge, the bowl walls and the base.

Fitting And Cut Out

This inset sink drops into the worktop from above over an 800mm base unit. One 35mm tap hole sits on the ledge behind the bowl.

Additional Information:

• Bowl size: 726 x 386mm (28.6 x 15.2in)

Shop Rangemaster Granite Composite Kitchen Sinks, 1 Bowl Granite Composite Kitchen Sinks and other Kitchen Sinks at Plumbworld today.