Key Features:
- Single deep bowl — gives you one wide space to work in
- Igneous granite composite — 80% quartz bound with 20% acrylic
- Matt cloud finish — the same colour inside and out
- Rectangular overflow — moulded into the bowl wall
- One 35mm tap hole — on the ledge behind the bowl
- 600mm minimum base unit — suits a standard run of units
Warranty:
What's Included:
Fit a large granite bowl into a standard cabinet with the Rangemaster Oridian Inset Single Bowl Granite Cloud Kitchen Sink. The bowl is 200mm (7.9in) deep with room to lay a roasting tin flat, and it drops into a 600mm base unit.
Cloud is a soft matt mid-grey, the same shade inside the bowl as on the ledge. The sink measures 570 x 500mm (22.4 x 19.7in) and the worktop is cut at 550 x 480mm (21.7 x 18.9in).
Single Deep Bowl
One bowl gives you a single uninterrupted space to work in, 200mm (7.9in) deep, with square corners and a small radius so nothing collects in them.
Igneous Granite Body
Igneous granite is a composite of 80% quartz bound with 20% acrylic, and this sink is moulded from it in one piece. The colour runs right through the material, so a chip shows the same shade as the surface.
Matt Cloud Finish
Cloud is a matt mid-grey. The finish is the same on the ledge, the bowl walls and the base.
Rectangular Overflow
The overflow is a rectangular slot moulded straight into the bowl wall. It has no separate cover plate, so there is nothing to lift out and clean.
Fitting And Cut Out
This inset sink drops into the worktop from above over a 600mm base unit. One 35mm tap hole sits on the 65mm (2.6in) ledge behind the bowl.
Additional Information:
- Bowl size: 500 x 400mm (19.7 x 15.7in)
- Maximum tap body diameter: 42mm
Shop Rangemaster Granite Composite Kitchen Sinks, 1 Bowl Granite Composite Kitchen Sinks and other Kitchen Sinks at Plumbworld today.
