Key Features:
- Single wide bowl — gives you one space to work in
- 1.2mm stainless steel — heavy gauge 18/10 throughout
- Micro-sheen finish — bare steel, polished and even
- Hammered apron front — stands proud at the cabinet front
- 600mm minimum base unit — suits a standard run of units
Warranty:
What's Included:
- 1 x Rangemaster Forge Belfast Kitchen Sink
- 1 x 90mm basket strainer waste
- 1 x overflow kit with coordinating waste cover
- Please note: a kitchen tap is not included.
Put a Belfast sink in a modern kitchen with the Rangemaster Forge Belfast Single Bowl Stainless Steel Stainless Steel Kitchen Sink. It takes the traditional apron front and presses it in heavy gauge stainless steel, with a hammered face that scatters the light across it.
The sink measures 595 x 460mm (23.4 x 18.1in) with a bowl 210mm (8.3in) deep, and it takes a 600mm cabinet.
Single Wide Bowl
One bowl gives you a single uninterrupted space, 210mm (8.3in) deep. Baking trays and grill pans lie flat in it.
Heavy Gauge Steel
The body is fabricated from 1.2mm 18/10 stainless steel. That is a thicker gauge than most pressed sinks use, and it lets the apron hold its shape with no frame behind it.
Micro Sheen Finish
Micro-sheen is the bare 18/10 steel with no colour layer over it, polished to a soft even sheen. The other four Forge sinks carry a PVD colour on the same body.
Hammered Apron Front
The apron is the flat face that shows below the worktop, and on the Forge it is hammered. The dimples break up reflections, so fingerprints and water marks are far less obvious than on a flat panel.
Tap Hole Position
No tap holes are pressed into the steel, so the tap goes on the worktop behind the sink. That leaves you free to set it where the run of units suits.
Additional Information:
- Bowl size: 535 x 400mm (21.1 x 15.7in)
Shop Rangemaster Belfast Sinks and other Kitchen Sinks at Plumbworld today.
