Filtered Hot and Cold Water

The InSinkErator HC3300 provides filtered cold water alongside near-boiling water from one curved kitchen tap. It gives you cold drinking water on demand while removing the wait for a kettle when preparing tea, coffee, instant meals, or pans of water for cooking.

Its brushed steel finish and curved design create a contemporary look that suits a wide variety of kitchens. Unlike conventional kitchen taps, this model is designed specifically to dispense filtered cold and steaming hot water.

Adjustable NeoTank

The compact NeoTank fits beneath the kitchen sink, helping keep the worktop clear. Its stainless steel tank has a 2.5-litre capacity, providing approximately 12 cups of heated water before it needs to recover.

A digital control allows you to select a temperature between 88°C and 99°C. The tank then maintains the chosen setting, so hot water is ready when you need it rather than requiring a kettle to be filled and boiled each time.

Two-Stage Water Filtration

The compatible filtration system uses two stages to improve the taste and quality of the dispensed water. A calcium filter helps reduce limescale and calcium before the water reaches the tank, while carbon filtration reduces chlorine, bacteria, metal contaminants, and small particles.

For continued performance, the water filter should be replaced approximately every six months. The system is compatible with the InSinkErator F-701R water filter.

Safer Hot Water Dispensing

A spring-loaded safety mechanism on the hot water lever means the flow stops as soon as the lever is released. This reduces unnecessary water use and helps lower the risk of accidental scalding.

The tap also produces a controlled, fine stream of hot water to help minimise spitting and spraying during use. Care should always be taken when dispensing water at high temperatures.

Quiet, Efficient Operation

The insulated NeoTank is designed to heat water and maintain the selected temperature quietly beneath the sink. As you dispense only the quantity required, boiling water taps can also help reduce the water and electricity wasted by repeatedly overfilling a kettle.

Tool-Free Tank Connections

Tool-free connections help make linking the tap to the NeoTank simpler. The system requires a mains water supply with a pressure between 1.7 and 8.6 bar.

The tap requires a mounting hole measuring 32–38mm in diameter. As the NeoTank operates at 220–240V, 1300W, and 5.7A, installation should be completed in accordance with the manufacturer’s instructions and relevant electrical and plumbing requirements.

Technical Information

• Tap height: 235mm
• Required mounting hole diameter: 32–38mm
• Required supply pressure: 172–862kPa, 1.7–8.6 bar, or 25–125psi
• Electrical supply: 220–240V
• Power rating: 1300W
• Current: 5.7A
• Tank capacity: 2.5 litres
• Adjustable temperature range: 88–99°C
• Compatible water filter: InSinkErator F-701R
• Water supply: mains

Upgrade Your Kitchen Tap

Add the InSinkErator HC3300 to your basket for filtered cold and near-boiling water from one stylish tap, complete with a compact digital NeoTank.