Please note: this is a replacement tap only. A compatible InSinkErator tank is required and must be purchased separately if you don’t already have one.

Refresh Your Existing Hot Water System

The InSinkErator H3300 lets you replace an existing compatible tap while retaining your working hot water tank. Whether your current fitting needs replacing or you want a different look, its curved spout and brushed finish give your kitchen a smart update.

If you’re comparing replacement taps for boiling hot water systems, check compatibility with your existing InSinkErator tank before ordering.

Near-Boiling Water Without Waiting for the Kettle

Paired with a compatible tank, the H3300 dispenses hot water at approximately 98°C for preparing drinks and everyday kitchen tasks. It’s a dedicated hot-water-only tap, rather than a replacement for your standard hot and cold mixer.

The separately sold InSinkErator system can deliver up to 100 cups per hour. Temperature adjustment is made using the tank’s dial, allowing you to set the water temperature at the heating unit beneath the sink.

Curved Styling and a Swivelling Spout

The brushed finish offers a softer appearance than polished chrome, while the curved shape suits a wide range of kitchen styles. Its 360-degree swivel spout lets you move the outlet to a convenient position over the sink.

For anyone choosing kitchen taps, the H3300 combines understated styling with practical everyday access to near-boiling water.

Push-Lever Locking for Controlled Use

The single handle makes dispensing straightforward, with a push-lever locking mechanism to help prevent accidental operation. This provides additional reassurance when using high-temperature water, although care is still needed during dispensing.

Installation Requirements

The tap requires a mounting hole between 35mm and 38mm and a water supply pressure of 1.7–8.6 bar. The compatible 2.5-litre stainless steel tank sits beneath the sink and is purchased separately.

The tap is WRAS approved and comes with a 2-year warranty.

Technical Specifications

• Water delivery: Hot only
• Water temperature: Approximately 98°C, supplied by a separate tank
• System capacity: Up to 100 cups per hour with a compatible tank
• Spout rotation: 360 degrees
• Required hole diameter: 35–38mm
• Required supply pressure: 172–862kPa, approximately 1.7–8.6 bar
• Tank: Compatible InSinkErator tank required; not included
• Warranty: 2 years

Buy Your InSinkErator H3300 Tap Today

Order the InSinkErator H3300 Curved Brushed Tap now and refresh your compatible hot water system with convenient dispensing and a stylish brushed finish. Explore our boiling water taps to find the right option for your kitchen.