Key Features:

• Replacement tap only — Requires a compatible, working InSinkErator tank and filtration system
• Steaming hot water — Dispenses filtered near-boiling water when connected to a compatible tank
• Hot-water-only design — Sits alongside your main kitchen tap
• Safety locking lever — Helps prevent accidental operation
• 360-degree swivel spout — Allows water to be dispensed from different angles
• Chrome finish — Creates a clean, contemporary appearance
• Required tap hole — 35–38mm diameter
• Required supply pressure — 172–862kPa (1.7–8.6 bar/25–125psi)
• Tank and filter sold separately

What's Included:

• InSinkErator H3300 Boiling Water Tap - Curved Chrome
• Hot-water tank and filtration system are not included

The InSinkErator H3300 replacement kitchen tap provides filtered steaming hot water at the pull of a lever when connected to a compatible InSinkErator tank and filtration system. Its curved design and polished chrome finish make it a practical addition to modern kitchens.

Replacement tap only

This product includes the replacement H3300 tap only. It is intended for customers replacing or updating an existing compatible InSinkErator tap.

A compatible, working InSinkErator hot-water tank and filtration system are required. The tank and filter are not included and must be purchased separately if needed. Check compatibility with your existing system before ordering.

Steaming hot water on demand

The H3300 provides convenient access to filtered near-boiling water for preparing hot drinks, blanching vegetables and completing other kitchen tasks. InSinkErator states that its Standard Edition tank heats water to as much as 98°C, while the temperature at the tap is typically around 1°C lower.

Safety locking lever

A push-lever locking mechanism helps reduce the risk of accidental operation. This is particularly important because the tap dispenses near-boiling water capable of causing scalds or burns.

360-degree swivel spout

The spout rotates through 360 degrees, allowing it to be positioned where needed over the sink. This provides greater flexibility when filling cups, jugs and pans.

Polished chrome finish

Elegant curves and a reflective chrome finish give the tap a contemporary appearance. Its compact side-tap design allows it to sit neatly alongside your main kitchen mixer.

Compatible tank performance

When paired with a compatible 2.5-litre InSinkErator tank, the system can provide up to 100 cups of steaming hot water per hour. The tank fits beneath the sink and allows the water temperature to be adjusted. Actual performance will depend on the tank model and installation.

Installation requirements

The tap requires a mounting hole measuring 35–38mm and a water-supply pressure of 172–862kPa (1.7–8.6 bar/25–125psi). Installation should follow the instructions supplied with the compatible tank and filtration system.