Hard-Wearing 304 Steel

The bowl is pressed from 304 stainless steel, the grade used for most Stainless Steel Kitchen Sinks. It stands up to the acids in food and in cleaning products. The wastes and the pipework supplied with it are stainless steel too.

Deep Single Bowl

One deep square bowl with a flat floor and a central waste, measuring 400 x 400mm across and 200mm deep. The sides run straight down to it. A 450mm cabinet takes it inset, or 500mm undermount.

25mm Corner Radius

The bowl corners are radiused at 25mm, a softer corner than the R15 sinks in the same range. The wider curve is quicker to wipe round than a square one.

Brushed Finish

Brushing leaves a fine directional grain across the steel, running the length of the bowl. The same satin finish carries across the rim.

Quieter Under the Tap

A pad is bonded to the underside of the bowl. It damps the drumming a thin steel bowl makes when you run the tap into it. The pad is out of sight once the sink is fitted.

Inset or Undermount

Set into the worktop the sink sits on a slim rim. Fixed underneath, the worktop edge is on show and the rim is hidden. Both sets of fixing clips are in the box, and Abode publish a cut-out for each fit: 420 x 420mm inset and 405 x 405mm undermount.

Worktop Thickness

The clips reach a worktop up to 55mm thick, which covers laminate, solid timber and most stone.

Order Yours Today

Put a deep square bowl into a narrow run of units, in or under the worktop, with the waste and the pipework already in the box. 304 stainless steel, R25 corners and an acoustic pad under the bowl make it a quiet sink in a 440mm footprint. Shop Abode Single Bowl Stainless Steel Sinks at Plumbworld today.