Key Features:
- 304 Stainless Steel — a hard-wearing surface throughout
- Deep Single Bowl — holds 27.6 litres
- R15 Rounded Corners — make the bowl quick to wipe round
- Brushed Steel Finish — gives a soft satin surface
- Inset or Undermount Fit — sits in or below the worktop
- Acoustic Pad — damps the noise of water on a steel bowl
- Dimensions — 540 x 440 x 205mm (21.3 x 17.3 x 8.1in)
- Weight — 4.08kg
- 10 year warranty — 1 year on the waste kit and pipework
What's Included:
- Abode Matrix R15 Inset Undermount Single Bowl Stainless Steel Kitchen Sink 540mm with Waste - AW5122
- 90mm Orbit basket strainer waste with a short bolt
- Rectangular overflow
- Single bowl pipework
- Eight inset fixing clips
- Eight undermount fixing clips
- Fitting and care instructions
- Please Note: Tap not included
Put the sink where you want it with the Abode Matrix R15 Inset Undermount Single Bowl Stainless Steel Kitchen Sink 540mm. Set it into the worktop and it sits low on a slim rim. Fix it underneath and the worktop edge runs straight to the bowl.
The bowl has square sides and a flat base, and the curves at the bottom are shallow enough to clean in one pass. The waste, the overflow and the pipework all come with it, so the tap is the only thing left to buy.
Hard-Wearing 304 Steel
The bowl is pressed from 304 stainless steel, the grade used for most Stainless Steel Kitchen Sinks. It stands up to the acids in food and in cleaning products. The steel is 1mm thick through the bowl.
Deep Single Bowl
One deep rectangular bowl with a flat floor and a central waste, measuring 500 x 400mm across and 198mm deep. The sides run straight down to it. A 600mm cabinet is the smallest it will go over.
15mm Corner Radius
The bowl corners are radiused at 15mm, a squarer corner than the R25 sinks in the same range. The radius is what gives the bowl its boxy look while still letting a cloth reach into the corner.
Brushed Finish
Brushing leaves a fine directional grain across the steel, running the length of the bowl. The same satin finish carries across the rim.
Quieter Under the Tap
A pad is bonded to the underside of the bowl. It damps the drumming a thin steel bowl makes when you run the tap into it. The pad is out of sight once the sink is fitted.
Inset or Undermount
Set into the worktop the sink sits on a slim rim. Fixed underneath, the worktop edge is on show and the rim is hidden. Both sets of fixing clips are in the box, so the choice is yours at the point of fitting.
Worktop Thickness
The clips reach a worktop up to 55mm thick, which covers laminate, solid timber and most stone.
Notched Cabinet Wall
Undermounted, the cabinet side wall is notched so the fixing clips clear it. It is a small cut-out at the top of the panel, out of sight once the worktop is on.
Order Yours Today
Put a wide steel bowl in or under the worktop, with the waste and the pipework already in the box. 304 stainless steel, R15 corners and an acoustic pad under the bowl make it a quiet sink that takes a full grill pan. Shop Abode Single Bowl Stainless Steel Sinks at Plumbworld today.
