Key Features:
- PVD Anthracite Finish — the colour is bonded into the steel itself
- Nano PVD Coating — repels water and dirt from the surface
- Hardened Steel Bowl — glass-bead blasted to raise its hardness
- Deep Single Bowl — holds 27 litres
- Inset or Undermount Fit — sits in or below the worktop
- Matching Waste Cover — hides the strainer in the same finish
- Dimensions — 540 x 440 x 200mm (21.3 x 17.3 x 7.9in)
- Weight — 3.26kg
- 10 year warranty — 1 year on the waste kit and pipework
What's Included:
- Abode Koto Inset Undermount Single Bowl Stainless Steel Anthracite Kitchen Sink with Waste - AW5162
- 90mm basket strainer waste in anthracite
- Rectangular flush overflow in anthracite
- Basket strainer waste cover in anthracite
- Single bowl pipework
- Four undermount fixing clips and four inset fixing clips
- Fitting and care instructions
- Please Note: Tap not included
Carry one colour right across the sink with the Abode Koto Inset Undermount Single Bowl Stainless Steel Anthracite Kitchen Sink. The bowl, the rim, the waste and the cover plate are all finished in anthracite.
Underneath the colour is a pressed steel bowl with vertical sides, tight corners and a flat floor. The waste, the overflow and the pipework are supplied with it.
PVD Anthracite Finish
Physical vapour deposition bonds a thin layer of anthracite into the surface of the steel. The colour is part of the bowl itself rather than a lacquer laid over the top. There is no separate coating sitting on the steel to chip or lift.
Nano PVD Coating
The coated surface is hydrophobic, so water and dirt are repelled rather than held on it. Abode call this Nano PVD, and say it is what keeps the bowl quick to clean.
Deep Single Bowl
The bowl has straight sides, a flat floor and a 10mm corner radius, so the walls run straight down to the floor. It measures 500 x 400mm across and 200mm deep. The tight corner radius is what gives the bowl its boxy look.
Matching Waste Cover
A basket strainer waste and a cover plate come in the same finish as the bowl. Drop the cover over the strainer and the waste sits flush with the floor of the bowl. It lifts straight out when you want to drain the sink.
Inset or Undermount
Set into the worktop the sink sits on a slim rim. Fixed underneath, the worktop edge is on show and the rim is hidden. Both sets of fixing clips are in the box, and Abode publish a cut-out for each fit: 516 x 416mm inset and 504 x 404mm undermount.
Worktop Thickness
The clips reach a worktop between 12 and 55mm thick, which covers laminate, solid timber and most stone. A 600mm cabinet is the smallest the sink will go over, inset or undermount.
Hardened Steel Bowl
The steel is glass-bead blasted before the colour goes on. Abode say the process raises its hardness and makes the bowl harder to scratch, so the anthracite goes onto a hardened surface.
Care and Cleaning
Stainless Steel Kitchen Sinks clean with soapy water and a non-abrasive cloth. Abode ask that you keep corrosive and abrasive substances off the finish, then rinse and dry the bowl after cleaning.
Order Yours Today
Carry one colour across the bowl, the rim, the waste and the cover plate, with the finish bonded into the steel rather than laid on top. A deep single bowl, a matching waste cover and both sets of fixing clips mean it can go in or under the worktop. Shop Abode Single Bowl Stainless Steel Sinks at Plumbworld today.
