Key Features
- Twin-lever control — Adjust hot and cold water separately using clearly marked handles
- Quarter-turn ceramic disc valves — Open fully with a short turn for smooth operation
- 360-degree swivel spout — Allows convenient positioning around the sink
- Anti-splash outlet — Helps reduce splashing during washing and rinsing
- Brushed nickel and black finish — Contrasting metallic details highlight the geometric design
- Brass body — Provides a durable structure for everyday use
- 35mm tap hole fitting — Suitable for worktops up to 60mm thick
- 5-year warranty — With 1-year cover on decorative finishes and O-rings
What’s Included
- 1 x Abode Hex twin-lever kitchen mixer tap in brushed nickel and black
- Base plinth and upper seal
- Fixing stud, triangular stabilising bracket, lower gasket, fixing bracket, and fixing nut
- Hot and cold flexible braided tails with non-return valves fitted
- Please note: compression fittings for the mains connection are not supplied.
Separate Controls for Hot and Cold Water
The Abode Hex has two levers marked HOT and COLD, making each supply easy to identify. Both operate individual ceramic disc valves, opening fully with a quarter turn for straightforward adjustment.
If you’re comparing kitchen mixer taps, this twin-lever arrangement gives you independent control when balancing the temperature and flow.
Flexible Spout Positioning
The squared spout reaches 220mm over the sink and swivels through 360 degrees, allowing you to move the outlet where needed. Its anti-splash design helps keep water directed into the bowl during everyday use.
A honeycomb aerator has a coin-slot insert for removal during cleaning and an M22F thread. The tap delivers 12.05 litres per minute at 3 bar.
Two-Tone Finish With Hex Detailing
The black body contrasts with brushed nickel on the levers, hexagonal collar, and base. These satin metallic accents draw attention to the tap’s shape, creating a distinctive addition to contemporary kitchen fittings.
Made from brass, the tap stands 369mm high. Its spout height is 251mm, with a 24mm spout diameter and a 48mm base diameter.
Installation Requirements
The Hex fits a single 35mm tap hole and worktops up to 60mm thick. A triangular stabilising bracket is included with the mounting components to support the installation.
The supplied 365mm flexible braided stainless steel tails have M10 connections at the tap and ½-inch BSP male connections at the supply. Non-return valves are fitted in both inlets.
Weighing 1.56kg, the tap operates between 0.5 and 5.5 bar. The recommended hot water temperature is 46°C, with a maximum of 60°C.
5-Year Warranty
The Abode Hex comes with a 5-year warranty, with decorative finishes and O-rings covered for 1 year. This offers added confidence when choosing kitchen taps for regular use.
Buy Your Abode Hex Kitchen Tap Today
Order the Abode Hex Twin Lever Kitchen Mixer Tap in Brushed Nickel & Black from Plumbworld now for smooth quarter-turn control and a distinctive two-tone finish.
