Coram Frameless Sliding Bath Screen (PWCM0751)

A sliding bathscreen is the ideal alternative to a folding screen. When not in use you can simply slide the outer panel back to the wall so that it takes up only half the space.

Unlike other sliding screens that tend to sag when extended due to the weight of the glass, Coram's ingenious 'slide and lock' mechanism* keeps the screen rigidly in place and perfectly horizontal when fully extended - providing the best seal with the edge of your bath. It also eliminates any risk of the screen sliding back whilst in use.

• High quality corrosion resistant aluminium frame
• Chrome frame with clear glass
• Glass edges are smoothed and rounded
• 5mm thick toughened safety glass
• Reversible for left or right fitting
• Coram bathscreens should be installed on baths with a flat rim

Dimensions:

• 1065mm open width (650mm when closed)
• 1400mm height

The sliding bathscreen takes up only half the space when not in use.

Choosing the right kind of bath for your bathscreen
Baths must have a flat rim and should be installed with top edge horizontal. Any water that collects around the taps should then drain into the bath.

Baths must not have raised handles or soap recesses that would prevent the bath screen from providing an effective seal with the rim of the bath.

The Bathscreen should be fitted so that the seal is in contact with the inside edge of the bath.