Stuart Turner Showermate 1.8 Bar Twin Impeller Positive Head Shower Pump
Designed to suit any tank fed, open vented system, the new Showermate offers the ultimate solution to poor performance.
All models in the Showermate range of fully automatic, positive head booster-pumps are ideal for shower and bath / shower installations. All pumps are supplied ready to fit into domestic plumbing systems throughout the UK and are Water Regulation Advisory Scheme (WRAS) compliant. Positive pumps are designed for installation into an open vented water system, where the outlet to be pumped is below the cold water tank, and has a minimum gravity flow of 0.8 l/min.
A Showermate twin pump is designed to boost the incoming hot and cold water supply to an individual shower, bath / shower mixer, or mixer tap.
These pumps should not be used for pumping to multiple outlets.
Features and Benefits:
|Noise Level (dB)||< 70|
|Outlet Pressure (Bar)||1.8|
|Connections||15mm Push Fit|
|Flexible Hoses Inc|
|Manufacturer Part Number||46407|
£131.65 (Inc. VAT)
RRP £189.97 Save £58
Price Guaranteed For
Promptly delivered, great price and reasonable price
Really happy with my purchase, goods arrived quickly. Pump is robust and really quiet, the fan in my bathroom is louder! Was easily installed in a morning
This was a replacement for a pump we have used daily for 18 years. It was easy to fit and runs much quieter than the old one. Works great on 15mm pipe.
My plumber recommended I replace my shower pump with this model, then said you were the best place to buy - he was right on both counts.
I bought this pump to replace an old New Team Shower pump NT45 installed by British Gas many years ago and had now started to leak. One reason for choosing this pump was because the position of the inlet/outlet ports were similar to those of the existing pump.
Although there was quite a bit of extra work to instal the 4 Flexi-hoses as the previous pump was plumbed in with copper pipe all the way down to the inlet/outlet ports.
I found the output from the shower head to be more than enough for our requirements.
Although the instruction manual states "All pipework MUST be 22mm for optimum performance" I was concerned to read this as our existing installation was 15mm throughout!
As it turned out the performance of the shower was more than adequate, but had I known that the manufacturer was specifying 22mm pipework in the manual,(for a pump with 15mm fittings), then I would'nt have chosen this pump because I was not wanting to change any of the existing pipework! For that reason I've not ticked the recommend box.
Anway I am happy with the pump so far(only used twice)and it is much quieter than the old one.
This pump was a replacement for the equivalent pump installed about 10 years ago. I did not realise how noisy the old one was until the new one went in. If this one does as well i'll be happy. Asked for next day am delivery and it was delivered before 9.30. The price was well below the next best so full marks Plumbworld
The only thing that may catch out the self installer would be the lack of inline water filters within the pump. They have to be bought and fitted as an extra. Otherwise an easy enough job.
The.unit burst into life fo the first time this morning, it produced a regular torrent of watery happiness.
It is the perfect set up, a child of four could put it together, though I wouldn't recommend you try that t home.
Easily installed in confined areas and quite in operation.
Very easy to put in nice and quiet packed well .arrived quickly
I bought this to replace my old one and it works fine. The price was excellent to.