Flo-Force Extra Macerator Pump - 600W with 3 Inlets
£89.97 (Inc. VAT)
If you are looking to install a new bathroom, cloakroom or utility room in a location that does not have access to the main plumbing system, use the Flo-Force Extra Macerator Pump to meet your plumbing needs. It is ideal for loft and basement conversions, among other applications. It processes waste, allowing it to be taken away quickly and easily through small plumbing pipes to the main plumbing system, meaning that you do not have to undertake major building and plumbing works.
Not all macerators are certified to the same standards. The Flo-Force macerator has been fully tested and approved. It is IP54 rated, conforms to LVD, EMC and ROHS directives and is CE approved.
- Use to create a bathroom or utility room anywhere
- No need for expensive, difficult plumbing and masonry work
- Steel motor casing
- No external joints, clips, valves or pipes
- Discharge pipe length to the first elbow MUST be a minimum of 0.5 metres
IP 54 rated
This means that the macerator has been fully certified and conforms to all relevant EU directives when it comes to installing a product in a moisture rich environment. You can certainly rest assured with the quality and safety of this excellent product!
60m Pumping distance
Make sure you've got enough power to get to your waste sewage pipework with this macerator and it's incredible 60m horizontal pumping power. It will also do another 5.5m vertically on top of that too!
High 140L flow rate
This Flo-Force macerator has plenty of power with it's impressive 140L flow rate.
Noise level of 55dB
On average the noise of a toilet flushing is approximately 75dB so with a maximum noise level of 55dB you certainly won't hear these macerators in operation, especially if they're fitted within a unit or hidden out of sight.
A 3 inlet macerator connects to a toilet and any 2 of the following products:
Fully Accredited Macerators
We want your bathroom to be as safe as possible so for a final seal of approval on quality we can confirm that our Flo-Force macerators conform to ROHS, Low Voltage and Electro Magnetic Compatibility directives.
- Pumps up to 5.5m vertically and 60m horizontally
- 140 litres per minute flow rate
- Minimum hassle with automatic activation
- Also includes manual switch for extra flexibility if required
- Low noise level approximately 55dB
- Motor runs for 5-10 seconds
- 3 inlets
- Outlet size 38mm
- For domestic use only
- Maximum water temp 40°C (degrees)
- IP54 rated for safe use in the bathroom
- Conforms to ROHS, Low Voltage and Electro Magnetic Compatibility directives.
- 12 month warranty
- Height: 300mm
- Length: 502mm
- Depth: 210mm
|Application||Full Bathroom (Standard Toilet)|
|Max Vertical Discharge||5.5 M|
|Max Horizontal Discharge||60 M|
|Max Water Temperature||40 C|
£89.97 (Inc. VAT)
This macerator from Flo-Force is quick, efficient, and not too noisy. As well as being fully functional, it conforms to all EU quality and safety requirements, so you can rest assured the product you are buying is safe to use in your home.
A great value budget macerator pump. I was a bit dubious at first, but for the money it does the job fantastically. Well made and a doddle to plumb in. Great customer support also from Plumbworld.
Simple to install, comes with all necessary fittings, powerful discharge, everything you'd expect from a macerator and at an affordable (cheapest I could find) price.
Good product seems to do every thing it says in the ad easy to fit very quiet and efficient excellent service from plumbworld every thing is good thanks
We installed this unit in may and is working great with a house full of people I would recommend this unit .
This one replaced a more expensive make but works just as well as the more expensive one. Great value
Delivered on time,Working well,very easy to install. Good puchase.
The Macerator works well, however did have some difficulty with matching up the diameter of the outlet pipe from the toilet bowl to the inlet of the macerator, had to use a joint connector with a insert to match the macerato end , and obviously a flexible joint to the bowl. Seems to be working ok now, I am not a plumber, strictly diy
Excellent quality for fraction of cost of well known brands...does exact same job