Stuart Turner Showermate U1.8 Bar Twin Impeller Universal Shower Pump - 46532
£354.20 (Inc. VAT)
The Showermate Universal Twin pump is designed and built using the very latest techniques. It's function is to upgrade and boost the current hot and cold water supply within your home. This pump can be used with a bath, shower mixer or mixer tap. Showermate Universal pumps are suitable for installation into open vented hot and cold water systems.
This pump is suitable for positive and negative head applications, and it does not require a gravity flow to start up. You know that you're in good hands, as this pump is manufactured by the UK's leading shower pump manufacturer, and also one of the longest established. However in the very rare case of any factory defects you are covered by a fantastic 3-year guarantee.
- Suitable for multiple or single outlets (maximum of four) within a bathroom subject to pump sizing.
- Equally, boosts the hot and cold water supplies
Features and Benefits:
- Impeller and pump body are manufactured from plastic
- No gravity flow of water is required to start
- Includes anti-vibration feet
- Peripheral type pump
- G ¾ female x 15 mm push-in x 200 mm long hoses included with isolating valves on inlet
- IP22 enclosure protection
- Quiet operation from 60dB
- WRAS Approved
- 3 Year guarantee
- Width (mm): 139
- Length (mm): 305
- Height excluding hoses (mm): 338
- Weight including fittings (kg): 5.6
3 Year Guarantee
Only Stuart Turner Offer a 3 year Guarantee on all their plastic shower pumps as standard, without the need to go through a time-consuming product registration process.
The UK’s Quietest Shower Pumps
Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available.
Anti-vibration Hoses as Standard
Supplied complete with 15mm anti-vibration hoses.
EPDM/PTFE/Aluminium Oxide Seals
PTFE and Aluminium Oxide seal materials provide the most reliable sealing solution available, reducing risk of pump leakage and resulting water damage to the home while the use of PTFE (Teflon) also reduces the chances of the seal sticking when a pump is not used for periods of time.
Stuart Turner shower pumps use less power than competitors products, saving money and the environment.
Continuously Rated Motor
Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.
Dry Run Protection
Dry run protection is really important for the wellbeing of your shower pump. Bearings and other internal parts may get seriously damaged if there is a blockage or a drop in pressure causing the pump to run dry.
Flow Switch Sensitivity
An automatic flow switch is crucial to have the shower running when it needs to be. When flow exceeds 0.8 litres per minute the pump automatically starts, delivering that powerful flow that it’s there for.
Induction Motor with auto-reset thermal trip
Thermal protection prevents dangerous overheating if the motor shaft locks or the bearings seize. It’s a valuable addition to stop your shower pump from being damaged should the worse happen and a fault occurs.
CE Marked for safety
CE marking means that the product is assessed thoroughly before it is listed for sale on the market whether that be in a shop or online. It means that the product meets certain requirements, like health and safety, to allow it to be sold.
WRAS Approved for quality
If you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.
Continually Evolving and Innovating
Continual investment in research and development ensures Stuart Turner remains at the forefront of design technology and innovation.
Developed the domestic shower pump market in the 1970’s.
Holders of numerous patents relating to shower pump technology including GB2494485 for Flomate and GB2349908 for mainsboost.
Four additional shower pump technology patent applications currently in progress.
Engineering Patents include everything from the Milking Machine to the 650cc water cooled, two stroke motor bike between 1912 and 1913!
Every pump is manufactured from only the highest quality components and raw materials.
Each individual pump is fully tested before leaving the factory.
All whole house, bathroom and shower pumps are WRAS approved and manufactured within ISO 9001:2008.
Guarantees that lead the industry - five years for Monsoon and Mainsboost.
|Type||Twin - Hot AND Cold|
£354.20 (Inc. VAT)
|Ergonomic Designs Bathrooms||£516.91|
Prices last checked on 16/09/2019
All prices are inc VAT and include delivery charges
Price Guaranteed For
Budget price negative head shower pump from Stuart Turner. Ha not really easily out performs everything else on the market. Quick and simple to install what more do you need. Quick delivery you get that as well from Plumbworld
Needed a replacement Stuart Turner Showermate shower pump. Plumbworld price was competitive, delivered on time and in good condition. Very happy with the service and will use them again.
the Pump arrived on time despite being on the Isle of Wight. The plumber had initial problems installing it but good phone support from Stuart Turner meant it was installed and work well, a lot quieter than the last pump.