Stuart Turner Showermate Universal Shower Pump 2.6 Bar Single Impeller - 46534
£269.00 (Inc. VAT)
3 Year Guarantee
Only Stuart Turner Offer a 3 year Guarantee on all their plastic shower pumps as standard, without the need to go through a time-consuming product registration process.
The UK’s Quietest Shower Pumps
Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available.
Anti-vibration Hoses as Standard
Supplied complete with 15mm anti-vibration hoses.
EPDM/PTFE/Aluminium Oxide Seals
PTFE and Aluminium Oxide seal materials provide the most reliable sealing solution available, reducing risk of pump leakage and resulting water damage to the home while the use of PTFE (Teflon) also reduces the chances of the seal sticking when a pump is not used for periods of time.
Stuart Turner shower pumps use less power than competitors products, saving money and the environment.
Continuously Rated Motor
Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.
Dry Run Protection
Dry run protection is really important for the wellbeing of your shower pump. Bearings and other internal parts may get seriously damaged if there is a blockage or a drop in pressure causing the pump to run dry.
Flow Switch Sensitivity
An automatic flow switch is crucial to have the shower running when it needs to be. When flow exceeds 0.8 litres per minute the pump automatically starts, delivering that powerful flow that it’s there for.
Induction Motor with auto-reset thermal trip
Thermal protection prevents dangerous overheating if the motor shaft locks or the bearings seize. It’s a valuable addition to stop your shower pump from being damaged should the worse happen and a fault occurs.
Single Impeller Shower Pump is designed to help improve your hot or cold water supply to a tap or to pump mixed water from a shower mixer. This pump will help maximise the pressure of your water to make the flow of your tap of shower more powerful.
This universal pump is suitable for use with both a positive or negative head. It boosts water pressure for gravity fed hot water systems, giving you the perfect shower each and every day.
CE Marked for safety
CE marking means that the product is assessed thoroughly before it is listed for sale on the market whether that be in a shop or online. It means that the product meets certain requirements, like health and safety, to allow it to be sold.
WRAS Approved for quality
If you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.
The Showermate Universal Twin pump is designed using the very latest techniques to upgrade and boost the current hot and cold water supply within your home, this pump can be used anywhere where a water supply is situated, so a bath, shower mixer and tap are all perfect examples. Showermate Universal pumps are suitable for installation into open vented hot water systems, in simple terms, this basically means you have a low water pressure and you're tired of not getting the showering experience that you deserve, as when you turn on the shower a little trickle of water comes out instead of an invigorating blast of water. Please note
Please note that this pump is suitable for positive and negative head applications, and it does not require a gravity flow to start up as well! meaning that almost everyone can use this if they're struggling with their water pressure. You know that you're in good hands as this pump is manufactured by the UK's leading shower pump manufacturers, and also one of the longest established too. However in the very rare case of any factory defects you are covered by a fantastic 3-year guarantee.
Features and benefits:
- Both pump body and impeller are made from a durable and long-lasting plastic
- Fully automatic
- Offering supreme efficiency and functionality to your showering performance
- Suitable for both positive and negative head applications
- Does not require a gravity flow
- Covered by a fantastic 3-year manufactured, for that added piece of mind
- Supplied with Anti-vibration feet
- Complete with 2 flexible hoses
- 15mm push fit hoses included.
- Maximum head (closed valve): 2.6 bar
- Performance at 9 l/min: 1.3bar
- Performance at 18 l/min: 0.3 bar
- Maximum flow: 18 l/min
- Length: 233mm
- Width: 139mm
- Height (excluding hoses): 338mm
Stuart Turner Showermate Universal Shower Pump 2.6 Bar Single Impeller - 46534 Video
Continually Evolving and Innovating
Continual investment in research and development ensures Stuart Turner remains at the forefront of design technology and innovation.
Developed the domestic shower pump market in the 1970’s.
Holders of numerous patents relating to shower pump technology including GB2494485 for Flomate and GB2349908 for mainsboost.
Four additional shower pump technology patent applications currently in progress.
Engineering Patents include everything from the Milking Machine to the 650cc water cooled, two stroke motor bike between 1912 and 1913!
Every pump is manufactured from only the highest quality components and raw materials.
Each individual pump is fully tested before leaving the factory.
All whole house, bathroom and shower pumps are WRAS approved and manufactured within ISO 9001:2008.
Guarantees that lead the industry - five years for Monsoon and Mainsboost.
|Feed Compatibility||Single - Hot OR Cold|
£269.00 (Inc. VAT)
|Pump Sales Direct||£352.80|
|Ergonomic Designs Bathrooms||£393.14|
Prices last checked on 02/04/2020
All prices are inc VAT and include delivery charges
Price Guaranteed For
Best priced quality pump of this type, never had any problems with them.
Supplied rubber feet are perfectly adequate if you seat on a firm base with well supported inlet/outlet hoses thus minimising sound sources. Pump seems well balanced with very little vibration. Installed in my bungalow loft (where there is no frost risk) alongside a new 50 gallon water tank on a raised platform giving 600mm head to the pump inlet via a short run of 22mm copper pipe. Approx 2M 15mm polypipe output to feed an Aqualisa Quartz 10.kW electric shower a further 1M below the pump. The whole system works sweetly and you wouldn't know there was a pump running. Not 5 stars only because I can't vouch for longevity.