123

123

Twin Impeller Shower Pump

Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave.

Positive Head

A positive head shower pump is designed to be gravity fed, therefor it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower. 

Do you suffer with an underperforming shower? Is the pressure painfully low? For a considerable upgrade at an affordable price the CTFORCE30PT twin impeller pump from Salamander is perfect addition to your bathroom or ensuite.

Twin impellers are designed to boost both hot and cold water supplies to a shower or other outlets. They pump water individually or at the same time. Ideally suited for use with a gravity fed water system.

They function best with showers and mixers producing an even pressure to give more efficient mixing capabilities. All installations are different but installation near the base of the hot water cylinder is recommended.

It is activated by the flow of water, this would usually be about 1 litre per minute per side. An attribute of a positive head pump.

Supplied with anti-vibration feet to assist in the reduction of noise and to aid in stability. No more worrying about waking the house with a late night or early morning shower.

This is a regenerative pump which works in a similar way to a powered water mill. It takes hold of the water, spins it around and throws it back out the other side of the impeller. The advantages to a pump like this include easy installation and a very reliable pump.

Salamander provide a brilliant 5 year guarantee with the pump!

Features and Benefits:

• Brass ended, long-lasting regenerative pump
• Compact seal
• Fully automatic and continuously rated
• Push fit flexible hoses (22mm) with integral isolating valves on inlets
• Anti-vibration feet for added noise reduction
• 5 year guarantee as standard
• Robust brass ended pump with matching brass impeller
• Crossover technology
• WRAS approved

Technical Specifications:

• 100ft head (3.0bar)
• Incredibly quiet 52.5dBA rating
• 4.0 amps/960 watts (Maximum)
• Continuously rated
• Pre-wired with 1.25 metre power cable