Ceramica baths from Plumbworld provide more than just practical bathing solutions. They bring stylish, innovative and unique baths and bathroom suites that are built to stand the test of time. This bath is manufactured using cast acrylic sheets for sanitary ware purposes, is reinforced with GRP and has a fully encapsulated wooden baseboard.
Features and Benefits:
White Finish
Capacity = 201 Litres
Made from Lucite sheet acrylic
Fully encapsulated 18mm Base Board
Comes pre drilled for a centre waste and overflow
Leg set included
Produced in accordance to EN198 (BS4305) European Norms for Bathtubs
Bath is supplied with a 10 Year Manufacturer's Guarantee
Ceramica Single Ended Square Bath - 1700x750mmDownloadable Documents
Technical Drawings
Specifications
Bath - Features
Type
Single Ended
Warranty
10
Years
CE Marked
Yes
Bath Material
Acrylic
Bath - Technical Information
Width
750
mm
Length
1700
mm
Product Weight
22
Kg
Complies to British Standard
• EN198 (BS4305)
£114.97(Inc. VAT)
Select Your Product Options
Order Now - Delivery From 21st Aug
Ceramica Single Ended Square Bath - 1700x750mmReviews
The bath looks like when its fitted. A little different to a lot as the sides are less curved then most baths so I am guessing that it would take more water to fill it. We are pleased with it.
Mdiy-er
4/ 5
this is a nice looking bath. most new baths come with a protective film but this only had it on the top edge. Wish I had applied masking tape over the film when marking for tap holes ****Please dont put masking tape directly on the surface as it does not come off easy**** I used masking tape to mark tap holes and it has left the sticky stuff on, very hard to remove. Underside was pre marked for bracket but was lumpy so had to move slightly to get flat area for fixing. comes with 2 steel brackets for underneath,4 adjustable feet and 4 metal wall brackets.
Avery Wallace
4/ 5
Overall quality is fine, but like everything nowadays it's all about how quick it can be made and how cheap. Needed to redo small blocks of wood stuck under the lip to enable a full length piece to be fitted to support the side and end. No a big problem until you try fitting the side and end panels which didn't fit to start with as the small blocks weren't lined up correctly.
