BEST SUITED FOR: Ceramic Tile & Natural Stone in small, irregular-shaped areas
Warmup design their systems using a 2mm, ultra-thin, dual-core heating element. The small cross-section of our element allows it to be installed in a matter of hours without raising floor levels.
There is no need to dig up the floor and no need to mix concrete. Simply fix our heating element to the subfloor, tile straight over and say goodbye to cold feet for good!
There are 4 packs sizes available, the largest pack is the DWS800 which can cover up to 5.9m². Multiple packs can be used together to cover a larger space (up to a maximum of 25m²). For example to cover a flooring space of up to 17.4m² you would use 3 x DWS800 packs.
|Manufacturer Part Number||DWS400|
£90.88 (Inc. VAT)
RRP £151.99 Save £61
Hurry! Only 1 Left
Pros: With is being loose wire it is very easy to lay around obsticales.
Cons: The holding down tape is thin which makes it fiddley to tape the loose wire down. Fiited the same system a few months ago and it come with much wider tape making it a lot quicker to tape down.
Fitted this in a new ensuite. Easy enough to lay although had to re-adjust the spacing to fill the space evenly.
Pros: Build quality, tech support.
Cons: Takes time to install.
Having installed 4 other brands of undertile heating in previous houses I was greatly impressed with the Warmup kit, it's got everything there to complete the job even down to the paint roller to apply the primer(also supplied). I found the instructions very concise and straight forward. Build quality is excellent and when coupled with the 3iE controller performs beautifully. However installation time took a lot longer than it said it would on the outside of the box, but that was probably just me trying to be perfect. Oh and their tech support are excellent!