Stuart Turner Monsoon 2.0 Bar Single Impeller Shower Pump

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 2.0 bar single high-pressure pump is driven by a continuously rated thermally protected induction motor. The Monsoon 2.0 bar single is ideally suited as an outlet pump installed between the shower valve and showerhead. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

• Stuart Turner Monsoon 2.0 Bar Single Impeller Shower Pump
• Hot & cold inlet strainers
• Stuart hard face mechanical seal
• Flow switch sensitivity: 0.6 l/min
• Max. inlet head: 14 metres
• Plumbing connection: 22 mm push-in
• Flexible hose: 2 off 22 mm push-in x 300mm long
• Anti vibration feet
• 2 Year Manufacturer's Guarantee