Hep2o Underfloor Heating Conservatory Pack

Manufacturer

Delivery Type

Very Large Product Click for details

Enlarge image

Hepworth Plumbing Products has launched a new underfloor heating pack designed specifically to provide a simple means of using this highly efficient form of heating in home extensions and conservatories. The system can readily be used by professional plumbers in conjunction with traditional radiator circuits and avoids the need for complex manifolds and separate pumps.

Ideally suited for conservatories, bathrooms and small extensions with a solid floor construction and floor area of up to 15m square. This pack is only suitable for solid floor constructions of a minimum 75mm thickness.

50 Year Manufacturer's Guarantee

As a result of its rigorous Quality Management Programmer, Hepworth Building Products offer a 50 Year Manufacturer's Guarantee against defects in materials or manufacturing of Hep2o underfloor heating pipe.

Hep2o Underfloor Heating Pipe

Hep2o underfloor heating (UFH) pipe incorporates an oxygen diffusion barrier providing maximum protection against oxygen ingress. The pipe is manufactured by a five layer co-extrusion process, with a layer of Ethylene Vinyl Alcohol (EVOH) enclosed between polybutylene inner and outer layers. Because the barrier pipe is fully enclosed it is not subject physical damage.

Return Temperature Controller

Ideal for small systems, including conservatories and bathrooms. The product which is built into a wall or partition, comprises of a fascia plate, valve and sensor which controls return water temperature. The underfloor heating controller is a simple to install self-actuating thermostat which regulates the temperature of the water leaving the floor heating circuit. This type of control does not require its own separate circulating pump or mixing circuit.

The return temperature limiter valve utilises a return temperature limit sensor which monitors water temperature. The controller maintains a constant return temperature by varying the amount of water that is allowed to flow through the underfloor circuit.

Advantages

• Simple to install and operate
• No need for extra pump and mixing valve
• No wiring
• Minimises the running costs
• Maintains a constant floor temperature
• High performance (self-actuating proportional)
• No room temperature distortions from short term free heat gains
• Excellent value for money
• 100 metre coil of 16mm Hep2o Underfloor Heating Pipe
• 25 metre coil of edge insulation strip
• Return temperature control sensor
• Return temperature limiter valve
• System isolation valve
• Pipe clips
• Cold form bends
• Floor insulation, polyethylene membrane and a screed additive are required for the successful installation of the underfloor heating pack. These are not supplied as part of the pack and the installer will need to source these items