Your basket is currently empty |
Your basket is currently empty |
You are here:
Summary of customer ratings & reviews
4.9 out of 5.0Breakdown of customer ratings & reviews (9 reviews)
 |  | 8 |
 | | 1 |
 | | 0 |
 | | 0 |
 | | 0 |
Great tool!!
Pros: Simple design but very effective.
Made applying silicone around my bath so much easier and left you with a very professional Finnish. There is nothing worse than going to the effort to put in a new bath, shower or sink only to ruin it with a shabby silicone job. Definately recommend the fugi applicator kit.
30-40 year old male consumer from Cheltenham
17 March 2012
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
best purchase ever
Pros: very versitile, lots of angles easy to use
This product is brilliant. Its the best money I have ever spent. Used it to finish off my Kitchen. It's given all the masking a professional finish. Its so easy to use and its wipe clean too. I would highly reccomend it.
40-50 year old male consumer from kent
18 January 2012
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Pros: Work a treat
Cons: A bit bricey.
Excellent product delivered by an excellent company.
50-60 year old male consumer from Glasgow
14 December 2011
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Essential
Pros: You can create professional looking silicon joints even if you are not an expert by a long shot.
Cons: Would be nice if it were cheaper.
Creating a smooth professional looking silicon joint is really, really difficult. I have never managed to do it ... until now, thanks to the fugi kit. I bought it because I was impressed by the reviews, and the video on You Tube. It seems a bit expensive for three small pieces of plastic, but it does work and I could not have done without it. There is a cheaper alternative from Unibond but there is only one tool (similar to one of the three in the fugi set) but it provides fewer angles and options, in particular if you have to deal with tight spaces (such as behind a sink tap).
50-60 year old male consumer from Norwich
30 June 2011
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Fugi Applicator Kit
Pros: Makes it easy to do a neat sealant job without mess, or getting your fingers sticky. It certainly saves a lot of sealant and, if you are using matching coloured sealant, it can pay for itself in no time.
Cons: A touch expensive for what it is - but so are diamonds!
I was recommended to the Fugi Applicator Kit and it works like I was expecting - perfectly!
Over 60 year old male consumer from North Oxfordshire
23 June 2011
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Does what it say's on the packet
27 November 2010
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Fugi makes siliconing so simple
Ordered Fugi kit, order arrived very promptly. I was reall impressed
This piece of kit makes achieving a professional finish very easy for most DIY'rs.
The cost of buying the fugi kit has been covered by the saving in silicon. No need to tape, no mess. Great.
Never new siliconing could be so easy
Thanks guys , will recommnend this to all my friends
Silicon Sam the Fugi Man
40-50 year old male consumer from Glasgow
5 April 2010
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Does exactly what it says on the tin!!!
Pros: carry case, easy to use, range of curves
Cons: sorry can't think of one
Very quick and easy to buy and the delviery was quick to. Very easy to use, i'm not a professional and produced a very good finish (enough the wife thought it was good enough!!)
30-40 year old male consumer from Birmingham, UK
4 January 2010
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
Easy Silicone sealer aplication
This is an excellent tool - forget the plastic scrapers and gouges you see at other shops, forget wetting a finger, this does a really easy and tidy job. Initially it looks espensive, but probably costs less than I have spent on lesser tools to do the same job. Save the messing, get one of these from the start.
In the kit there are a number of edges that can be used according to the gap you are filling - curves, angles, even a little hump to seal an otherwise flat surface.
You use it by applying the sealer, pressing this tool into the corner and dragging it along the join while pushing it in. Just keep an eye on the amount it is skimming off - you don't want it "overflowing".
Ideally you need to apply just enough sealer for there to be some to remove.You also need kitchen roll to hand to remove excess from the tool.
It only takes a few mins to get the hang of it, then nice tidy joints are a doddle.
Is there a down side? It is a little too big to get behind my bath taps!
40-50 year old male consumer from Bolton
26 August 2009
| Overall Rating | |
| Build Quality | |
| Looks | |
| Value for Money | |
BathroomsBathroom SuitesCloakroom SuitesBathsWashbasinsToiletsBidetsBathroom TapsBathroom FurnitureHeated Towel RailsSmall BathroomsIndividual Toilets & BasinsBath PanelsBathroom CabinetsToilet SeatsBathroom AccessoriesBathroom MirrorsBathroom LightingExtractor FansBathroom MaceratorsBathroom Repairs
Assistive ProductsShowersShower EnclosuresKitchen SinksHeating SystemPlumbing Supplies
Add your own review