The TP5000 Si is an easy to install-and-use 5/2 day programmable room thermostat which offers up to six time and temperature changes each day with different programmes for weekdays and weekends.
Battery powered for ease of installation, the TP5000 Si has a large, easy-to-read LCD display. It is easy to programme and operate because of a built-in switching programme that the user can easily change to suit individual heating requirements. A big plus with the TP5000 Si is that it incorporates a real time clock and calendar function which eliminates the need for time-setting and BST/GMT time changes. Time and date are factory-set making time setting or adjustment unnecessary.
Conventional On/Off control is the standard setting for the TP5000 Si but advanced chrono-proportional control is an installer-set option. This modulating control mode uses a cycling pattern within which boiler on/off percentages are varied to satisfy heating requirements.
Chrono-proportional cycling rates of 3, 6, 9 or 12 per hour can be selected.
Service Interval function
The optional Service Interval function incorporated into the TP5000 Si helps landlords meet the boiler servicing requirements of Gas Safety Regulation 36. The unit provides audible and visual warnings from 28 days before servicing is due and ultimately reduces the heating output should the due date pass. Full heating operation can only be restored by an authorised installer.
|Manufacturer Part Number||087N791000|
£46.15 (Inc. VAT)
RRP £109.97 Save £63
Price Guaranteed For
Danfoss is a name to trust, this TP5000Si programmable room thermostat is simple to use and saves on your heating costs . Your house temperature and timing can be set each day just as you want it .It can be overridden if required .
after 12 years the lcd on my thermostat had begun to fade out. This replacement looked and fitted exactly like the original; so min bother to change over, brilliant.
Also great value.
I had been looking everywhere for a programmable roomstat that does not keep cycling the heating on and off, i.e. simply switches on and off at the requested temperatures - and this does the job perfectly; although that feature can be turned on if required. And very adaptable to suit individual requirements, e.g. 24hr or 5/2 day cycle, 2, 4, or 6 events per day, calibration adjust, optimum start or delay start, etc. Recommended.
Easy to ibstall and simple to use