MagnaClean Central Heating Cleaner

Why have MagnaClean?

We live in an age of high efficiency boilers, but for many years little attention has been placed on the cleanliness of central heating systems.

The majority of systems suffer from black iron oxide contamination, which creates thick sludge deposits that are the result of corrosion taking place within radiators and other metallic components. The oxide particles can range from very large to sub-micron, with the latter leaching into the system water continuously during use. These particles bond to all components, often causing premature failure of pumps and valves. When they contaminate the boiler heat exchanger and pipework, dramatic efficiency losses result. Tests have shown that even a minimal build up results in a serious drop in boiler efficiency!

The Magnaclean filter will provide many years of protection, maintaining the high efficiency of your heating system, resulting in financial benefit and increased reliability, and is backed by a two year limited guarantee.

How it Works

MagnaClean Professional has been carefully designed to remove particulate from suspension, whilst allowing 100% flow rate at all times.

Installation is simple, with each isolation valve rotating through 360°C, supporting any number of location options. These valves have been specially designed for use with Magnaclean and have high quality P.T.F.E seals.

An added advantage to installers is the ‘Pro-Fill’ air vent built in to the lid. This special vent incorporates a unique one-way valve, allowing the installer to inject corrosion inhibitor chemicals directly into the Magnaclean without the need to isolate anything. Just remove the air vent screw, inject the chemical and replace the air vent screw. Simple!

Magnaclean® is a powerful, compact magnetic filter with a unique swirl chamber designed to remove 100% of suspended Iron Oxide and other particulate from the water circulating through the heating system. Unlike typical Y-strainer filters which clog up and experience a dramatic reduction in flow performance, Magnaclean® maintains full flow rates at all times, and is so powerful it will retain at least 50X the amount of debris on its easily removed sheath. The incredibly tough ‘Glass fibre reinforced Nylon’ shell is almost unbreakable.

Incorporated into the lid is a special air vent, which allows installers to quickly and easily add corrosion inhibiting chemicals without the need to isolate the filter. Simply unscrew the vent nipple (one-way valve shuts off), connect the chemical adaptor (supplied with all concentrates) and introduce the liquid directly into the heart of Magnaclean, where it will quickly disperse into the circulating water. Replace the vent. Job done!

Initially available to suit 22mm pipe work. A twin 300mm high unit built onto a special plinth is available, that has been specifically designed for installers who Power-Flush systems, to prevent contaminants released during the flushing process from entering the heating boiler.

To demonstrate we put an
example of black iron oxide
sludge in to a container...

and shook it up...

then we added the
MagnaClean filter...

After 15 seconds, the
MagnaClean has already
collected many of the oxide
particles & the water is
clearing...

Another minute & virtually all
the oxide has been trapped by
the MagnaClean leaving the
water clean and clear...

out it comes! ready for easy
cleaning and disposal of that
filthy black sludge

• Powerful, compact magnetic filter
• Designed to remove particlate from suspension, whilst allowing 100% flow rate at all times
• Simple installation
• ‘Pro-Fill’ air vent
• Maintains full flow rates at all times
• Suitable for 22mm pipework

This Is What Previous Customers Say About the Magnaclean

Click Here to read the transcript of this audio. (Opens in a new window)
"Cleans muck out of your Central Heating System you would never believed was there."

David Meadows, Ringwood

Read More Customer Reviews